![background image](http://html.mh-extra.com/html/fritz/fritz-box-7530/fritz-box-7530_manual_2338511001.webp)
Safety Instructions
•
Do not install the FRITZ!Box during an electrical storm.
•
During a storm, disconnect the FRITZ!Box from elec-
tric power and from the DSL network.
•
The ventilation slits of the FRITZ!Box must never be
obstructed.
•
Do not place the FRITZ!Box on overly heat-sensitive
surfaces.
•
Connect the FRITZ!Box to an easily accessible outlet.
•
The FRITZ!Box is intended only for indoor operation.
See also the security instructions in your
FRITZ!Box manual.
Connect to Electric Power
Connect the FRITZ!Box to electric power. The “Power/DSL” LED begins
fl
ashing quickly.
Connect to a Modem
Connect the network cable to the „LAN 1“ socket on the FRITZ!Box and to the modem.
Package Contents
Radio Frequencies
The device receives and transmits radio waves during
operation. The radio technologies (frequencies) used are
listed on the outer cardboard box.
See the table for information about the frequency ranges
the device uses and the maximum transmitter power
associated with these ranges.
Frequency
Frequency
Range
Max. Transmitter
Power
2.4 GHz wireless LAN 2400
MHz – 2483
MHz
100
mW
5 GHz wireless LAN
5150
MHz – 5350
MHz
200
mW
5470
MHz – 5725
MHz
1000
mW
DECT
1880
MHz – 1900
MHz
250
mW
In the 5-GHz band for wireless LAN, the range from
5.15
GHz to 5.35
GHz is intended only for indoor use. This
restriction or requirement is e
ff
ective in the EU member
states AT, BE, BG, CY, CZ, DE, DK, EE, EL, ES, FI, FR, HR, HU,
IE, IT, LT, LU, LV, MT, NL, PL, PT, RO, SE, SI, SK, UK.
Connect to the DSL Network
Connect the FRITZ!Box to your DSL line with the DSL cable.
If you have a DSL
line and also an
analog or ISDN
telephone line with a
DSL splitter, connect
the FRITZ!Box with
the DSL/telephone
cable included in the
package. For more
instructions, read
the PDF manual
available at
en/avm.de/service
.
Power
LAN 4
LAN 3
LAN 2
LAN 1
FON
DSL
Register Cordless Telephones
•
Start your telephone.
•
If you have a
FRITZ!Fon
, press the “Connect/WPS” button on the FRITZ!Box. The “WLAN”, “DECT”
and “Connect” LEDs
fl
ash and the FRITZ!Fon is registered immediately.
•
Telephones from other manufacturers
must
fi
rst be made ready for registration; then enter
the PIN of the FRITZ!Box on the telephone (a value of “0000” is precon
fi
gured) before concluding
registration with the “Connect/WPS” button.
Search for telephones
Press brie
fl
y
The FRITZ!Box simultaneously supports up to six
cordless telephones from any manufacturers.
Info
Connec
t/W
PS
Fo
n/D
ECT
WLAN
Power
/DSL
FON
Power
LAN 4
LAN 3
LAN 2
LAN 1
FON
DSL
1 network cable
1 DSL cable
1 FRITZ!Box 7530
1 quick guide
Connecting and Sur
fi
ng the Net
75
30
Connecting and Sur
fi
ng the Net
75
30
Power
LAN 4
LAN 3
LAN 2
LAN 1
FON
DSL
1 telephone adapter
Fon/DECT
Power
/DSL
WLAN
Fon
/DECT
Connect
/WPS
Info
DECT
1 power adapter and adapter
© A
VM Computer
sy
steme
Vertriebs GmbH • Documentation r
elease 12/2018 • 521574001