Contents
Nomenclature ............................................2
Product Specifications
...............................3
Dimensions
................................................5
Airflow Specifications
................................7
Wiring Diagram ........................................19
Accessories
..............................................20
Standard Features
Cabinet Features
•
Heavy-duty aluminized-steel tubular heat exchanger
•
Stainless-steel secondary heat exchanger
•
Single-stage gas valve
•
Durable Silicon Nitride igniter
•
Quiet single-speed induced draft blower
•
Self-diagnostic control board with constant
memory fault code history output to a LED
•
All models comply with California 40 ng/J
Low NOx emissions standard
•
Can no longer be installed in California’s South Coast
Air Quality Management District (SCAQMD)
on or after October 1, 2019.
•
AHRI Certified; ETL Listed
•
Designed for multi-position installation —
GM9S96: upflow, horizontal left or right
GC9S96: downflow, horizontal left or right
•
Certified for direct vent (2-pipe)
or non-direct vent (1-pipe)
•
Easy-to-install top venting with optional side venting —
GM9S96/upflow models only
•
Convenient left or right connection
for gas and electrical service
•
Cabinet air leakage (
Q
Leak
) ≤ 2%
•
Heavy-gauge steel cabinet with durable finish
•
Fully insulated heat exchanger and blower section
•
Airtight solid bottom or side return with
easy-cut tabs for effortless removal in
bottom air-inlet applications
Single-Stage, Multi-Speed
ECM Gas Furnace
Up to 96% AFUE
GM9S96/GC9S96
Heating Input: 40,000–120,000 BTU/h
*
Complete warranty details available from your local dealer or at www.goodmanmfg.com. To receive the Lifetime Heat Exchanger Limited Warranty
(good for as long as you own your home), 10-Year Unit Replacement Limited Warranty and 10-Year Parts Limited Warranty, online registration must
be completed within 60 days of installation. Online registration is not required in California or Québec
.
SS-FGM9S96/FGC9S96
www.franklinhvacsysstems.com
8/21
