![background image](http://html1.mh-extra.com/html/fpxair/fpx-130/fpx-130_operating-instructions-parts-list-and-warranty_2326054001.webp)
MODEL: FPX-130
1/2" IMPACT WRENCH
Operating Instructions, Parts List & Warranty
IMPORTANT!
Read carefully before operating this tool.
Failure to operate any power tool properly can result in personal injury and/or property damage!
0
7.2.2.3 GENERALSAFETYRULES
• Multiple hazards. Read and understand the safety in�tructions befo� installing,
operating, repairing, maintaining, changing accessories on, or workmg
0
near the power tool. Failure to do so can result in serious bodily injury.
• Only qualified and trained operators should install, adjust or use th� power tool.
• Do not modify this power tool. Modifications may reduce the effectiveness of safety
measures and increase the risks to the operator .
• Do not discard the safety instructions -give them to the operator.
• Do not use
a
tool If the tool has been damaged .
• Warnings shall be given against the risk of explosion or fire due to the material
being processed.
• Warnings shall be given against the risk of cutting.
7 .2.2.4 PROJECTILE HAZARDS
• Failure of the work piece, of accessories, or even of the tool itself may generate
high velocity projectiles .
• Always wear impact-resistant eye protection during operation of the tool. The grade of
protection required should be assessed for each use.
7.2.2.S ENTANGLEMENT HAZARDS
• Entanglement hazard - choking, scalping and/or lacera�ons can occur if neck ware,
hair or gloves are not kept away from tool and accessones.
7.2.2.6 OPERATING HAZARDS
• Use of the tool may expose the operator's hands to hazards indudlng crushing,
impacts, cuts and abrasions and heat. Wear suitable gloves to protect hands.
• Operators and maintenance personnel must be physically able to handle the bulk,
weight and power of the tool.
• Hold the tool correctly: be ready to counteract normal or sudden movements- have
both hands available.
• Maintain a balanced body position and secure footing.
• Keep hands away from rotating or reciprocation accessories, spindles or other
moving parts.
• Release the start and stop device in the case of an interruption of the energy supply
• Use only lubricants recommended by the manufacturer.
Q
7.2.2.7 REPETfTIVE MOTIONS HAZARDS
• When using a power tool, you may experience discomfort in your hands, arms,
shoulders, neck, or other parts of your body.
. .
• While using a power tool, position your body in a comfortable posture. Mamtam
secure footing and avoid awkward or off-balanced postures. Changing your posture
during extended tasks may help avoid discomfort and �tigu�.
.
• If you experience symptoms such as pers1ste�t or recur'.mg d1sc�mfort, pam, .
throbbing, aching, tingling, numbness, bummg sensation, or stiffne�s, do not ignore
these warning signs. Promptly tell your employer and consult a qualified
health professional.
7 .2.2.8 ACCESSORY HAZARDS
• Only use sizes and types of accessories and consumables that are recommended by
the power tool manufacturer.
7.2.2.9 WORKPLACE HAZARDS
• Slips, trips and falls are major causes of workplace injury. Be awa�e ?f slippery su�ces
caused by use of the tool and also of trip hazards caused by the a1rhn� or hydraulic hose.
• Proceed with care in unfamiliar surroundings. Hidden hazards may exist, such as
electricity or other utility lines.
• This power tool is not intended for use in potentially explosive atmospheres and is
not Insulated from coming into contact with electric power.
•
Make
sure there are no electrical cables, gas pipes etc. that could cause a hazard if
damaged by use of the tool.
&
7.2.2. 10 DUST AND FUME HAZARDS
'-iir
.
Dust from some work pr
o
cesses can cause cancer, birth defects or other respiratory
diseases. Risk assessment of these hazards and implementation of appropriate
controls Is essential.
• If the pneumatic tool is used in a dust filled environment exhaust air can cause a
dust hazard .
• Dusts and fumes generated when using power tools can cause ill health (for example:
cancer, birth defects, asthma and/or dermatitis); risk assessment of these hazards
and implementation of appropriate controls of is essential.
.
• Risk assessment should include dust created by the use of the tool and the potential
for disturbing existing dust.
• Operate and maintain the power tool as recommended In these Instructions, to
minimize dust or fume emissions
• Direct the exhaust so as to minimized disturbance of dust in a dust filled environment
• Where dusts or fumes are created, the priority shall be to control them at the point
of emission .
• All Integral features or accessories for the collection, extraction or suppression of
airborne dust or fumes should be correctly used and maintained in accordance with
the manufacturer's instructions.
• Select, maintain and replace the consumable/inserted tool as recommended In
these instructions, to prevent an unnecessary increase in
dust
orfu�es.
• Use respiratory protection as instructed by your employer or as required by
occupational health and safety regulations;
7.2.2.11 NOISE HAZARDS
• Unprotected exposure to high noise levels can cause permanent, disabling, hearin�
loss and other problems such as tinnitus (ringing, buzzing, whistling or humming m
the ears) .
• Risk assessment of these hazards and implementation of appropriate controls of
is essential.
• Appropriate controls to reduce the risk may include actions such as damping materials
to prevent work pieces from 'ringing'
.
.
• Use hearing protection as instructed by your employer or as required by occupational
health and safety regulations;
• Operate and maintain the power tool as recommended in these instructions, to
prevent an unnecessary Increase in noise levels;
.
• Select, maintain and replace the consumable/inserted tool as recommended m
these instructions, to prevent an unnecessary increase in noise.
Q
7.2.2,12 VIBRATION HAZARDS
, Exposure to vibration can cause disabling damage to the nerves and blood supply
of the hands and arms;
• Wear warm clothing when working in cold conditions and keep your hands warm
and dry.
• If you experience numbness, tingling, pain or whitening of the skin in your fingers
or hands, stop using the power tool, and tell your employer._You should also seek
medical advice from a qualified occupational health professional.
• Operate and maintain the power tool as recommended in these Instructions,
to prevent an unnecessary Increase in vibration;
.
• Select, maintain and replace the consumable/inserted tool as recommended m
these instructions, to prevent an unnecessary increase in vibration levels;
• Support the weight of the tool in a stand, tensioner or balancer, because the operator
can then use a lighter grip to support the tool.
.
.
• Hold the tool with a light but safe grip taking account of the requtred hand reactmn
forces, because the risk from vibration is generally greater when the grip force
Is higher.
7.2.3 ADDITIONAL SAFETY INSTRUCTIONS FOR PNEUMATIC POWER TOOLS ·
AIR SUPPLY & CONNECTION HAZARDS
• Air under pressure can cause severe injury.
• Never direct air at yourself or anyone else .
• Whipping hoses can cause severe injury. Always check for damaged or loose hoses and
fittings.
• Whenever universal twist couplings (claw couplings) are used, lock pins
must
be installed .
• Do not exceed the maximum air pressure stated on the tool.
• Use whip check safety cables to safeguard against possible hose to tool and hose
to hose connection failure.
• Never carry an air tool by the hose.