Auto VH1 User Manual
Last update: 2022-02-15
This manual can be downloaded in pdf format here: [
The latest version of this manual can be found by scanning the QR code on the main unit or at this
url:
https://docs.google.com/document/d/1PKKcvXml7m4sm62oZJSDlhwSv1StEfk82z2V0mY9Wq4/edit?
usp=sharing
Or:
Congratulations on the new tool you selected.
This is the user manual for the Auto VH 1 (v 1.4), Automatic Vacuum
pump and Heater controller for use in composite work or related
applications.
Units prior to v1.3 does not show the firmware version at start up must
refer to the old manual available
. Owners of the pre-v1.4 units
can contact us to arrange for a firmware update to provide you with an
enhanced unit.
The Auto VH1 was designed by a composite builder for the composite builder that needs a device to
help with the requirements of the layup, moulding and curing of composite materials like carbon fibre,
fiberglass, epoxies and other resins. For most of these materials good temperature control is
required and a vacuum controller to manage the vacuum at the right level and help to protect the
pump by avoiding over running or over cycling the pump.
Items covered in this manual:
Auto VH1 controller overview
Operating Instructions
Set Pressure - Units, upper & lower limits
Set Temperature limits
Accessories: AutoVH1 Max Power high power heater controller use.
Disclaimer:
The AutoVH1 units are used in various environments out of the Manufacturer and distributor’s control
and therefore the manufacturer and distributor is not liable for any injury, loss or damage whatsoever,
not to the unit and also not to any person or other property or work. The use of the unit is entirely at
your own risk.
Summary of Contents for Auto VH1
Page 7: ......
