![background image](http://html.mh-extra.com/html/forest/diamond/diamond_manual_2319234001.webp)
07/2016 WDOC Diamond remote
www.forestgroup.nl
v1.4
FOREST DIAMOND REMOTE – 520109X460
TECHNICAL SPECIFICATION:
● 3V battery type CR2450
● transmit range indoor max. 30mtr
● battery life < 3 years
● working temperature -10°C - +50°C
● frequency 433.92MHz
● each channel can control up to 20 receivers
● transmit power max. 10mW
channel leds
1 2 3 4 5 6
OPEN/UP
switch on/off (keep
button
pressed 3 seconds)
STOP
button
P button (for program-
ming tubular motor)
CLOSE/DOWN
button
INSERT BATTERY:
channel up/down
1. remove screw
2. slide back cover upwards
to open remote and slide
in battery, +side up
BATTERY EMPTY:
After changing the battery, programmed receivers will stay in memory of wall
switch. Please follow the local regulations for disposal of the empty battery.
FOREST SHUTTLE S / L / M RECEIVER PROGRAMMING
You can recognize these Shuttle motors by the white antenna cable
To program a Diamond Remote to a Shuttle S / L / M Receiver:
antenna
LED MOVES FROM
LED STARTS BLINKING
1
st
→2
nd
→3
rd
LED
3x
1x for 5 sec.
press 1x OPEN button
Same procedure, but press CLOSE instead of OPEN, will erase the programmed channel.
Do not mount the motor within 1 meter from other equipment and receivers.
This will interfere with the receiver.