Flycam Swivel Assembly Manual Download

Page: 1 / 5

What

’

s In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.

Swivel

(

015

00)

A s s e m b l y M a n u a l

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo

copying, recording, or otherwise, except as may be expressly permitted by the applicable

Flycam swivel

Rod

Allen Key (4mm, 3/16mm, 3mm)

Bush

Ronin Adapter Plate

Summary of Contents for Swivel

Page 1: ...All rights reserved No part of this document may be reproduced stored in a retrieval system or transmitted by any form or by any means electronic mechanical photo copying recording or otherwise except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher Flycam swivel Rod Allen Key 4mm 3 16mm 3mm Bush Ronin Adapter Plate ...

Page 2: ...help of a 4mm Allen key and insert the rod After tightening the bolt attach the end cap to the rod as shown in images Tighten the bolt of the Flycam swivel with a 4mm Allen Key Swivel Setup Remove the bolt of the Flycam swivel by loosening it with the help of a 3 16 mm Al len key ...

Page 3: ... screw bush by removing the handlebar Now separate the top part of the swivel Remove all the screw bush as shown in the image Then place the handlebars one by one on the Ronin plate Place the top plate of the next Flycam swivel on top As shown in the image ...

Page 4: ...nd insert it into the swivel Loosen the knob of the DJI Ronin handle Not Included After inserting into the swivel insert the handle Remove the bolts from the top plate of the Flycam swivel with the help of a 4mm Allen Key DJI Ronin Gimbal Not Included Tighten the handle properly as shown in the image ...