Fisher-Price Cadillac ESCALADE H044040 Owner'S Manual & Assembly Instructions Download

Page: 1 / 36

Please read this manual and save it

with your original sales receipt.

Tools needed for assembly: Phillips Screwdriver

(not included); Assembly Tool (included). Use

(not included); Assembly Tool (included). Use
only with a Power Wheels

only with a Power Wheels

12 Volt Lead Acid

Rechargeable Battery and Power Wheels

12 Volt Charger with Type 12V Connector

(both included). Requires four "C" (:LR4) alkaline

batteries for FMRradio/Simulated CD Player/Digital

Clock/Microphone operation.

Owner's Manual

with Assembly

Instructions

For Model H04

For Model H0440

Owner's Manual

with Assembly

Instructions

For Model H0440

Product features may vary

from the picture above.

Product features may vary

from the picture above.

CUS

CUSTO

TOM EDITIO

M EDITION

Please read this manual and save it

with your original sales receipt.

Tools needed for assembly: Phillips Screwdriver

(not included); Assembly Tool (included). Use
only with a Power Wheels

12 Volt Lead Acid

Rechargeable Battery and Power Wheels

12 Volt Charger with Type 12V Connector

(both included). Requires four "C" (LR14) alkaline

batteries for FM Radio/Simulated CD Player/Digital

Clock/Microphone operation.

25-2201-41625

Cadillac, the Wreath & Crest Emblem, Escalade, all related Emblems

Cadillac, the Wreath & Crest Emblem, Escalade, all related Emblems
and vehicle body designs are General Motors Trademarks used under

and vehicle body designs are General Motors Trademarks used under
license to Fisher-Price.

license to Fisher-Price.

Cadillac, the Wreath & Crest Emblem, Escalade, all related Emblems
and vehicle body designs are General Motors Trademarks used under
license to Fisher-Price.

CUSTOM EDITION

Summary of Contents for Cadillac ESCALADE H044040





































Search results

Summary of Contents for Cadillac ESCALADE H044040

Reviews:

Related manuals for Cadillac ESCALADE H044040

Brands by name

Popular brands

Fisher-Price Cadillac ESCALADE H044040, Owner'S Manual & Assembly Instructions

Search results

Summary of Contents for Cadillac ESCALADE H044040

Reviews:

Related manuals for Cadillac ESCALADE H044040

Brands by name

Popular brands