1
®
DESCRIPTION
The Fireye
®
BurnerLogix™ System is a microprocessor based burner management control system
designed to provide the proper burner sequencing, ignition and flame monitoring protection on auto-
matically ignited oil, gas, and combination fuel burners. In conjunction with limit and operating con-
trols, it programs the burner/blower motor, ignition and fuel valves to provide for proper and safe
burner operation. Through SMART LED’S, the control provides current operating status and lockout
information in the event of a safety shutdown. Optional VFD and LCD displays are available that
may be either plugged in or mounted remotely to give full language descriptors of current status and
diagnostic lockout information. Refer to BurnerLogix PROGRAMMER SELECTION later in this
document for the various combinations of programmer and display modules.
A complete BurnerLogix system includes the YB110 (YB230) chassis equipped with the type of
flame amplifier required for the application, appropriate flame detector, plug-in programmer mod-
ule, wiring base and optional alpha-numeric display. Interchangeable programmer modules allow for
complete versatility in selection of function, timing and flame failure response times.
The optional alpha-numeric display is made up of 2 lines by 16 characters per line and is available in
either vacuum fluorescent or liquid crystal formats. The advantage of VFD is high brightness and
extended temperature range to –40°F. Both displays contain a fully functional keypad allowing the
user to easily scroll through the various menus to view the current operating status, review program-
mer configuration, and lockout history. An advantage of the BurnerLogix control family is the abil-
ity to set many of the operating parameters associated with proper and reliable burner operation
allowing inventory of various programmer types to be kept to a minimum.
The YB110 (YB230) is a chassis/flame amplifier module complete with mounting screws and blank
display module. The display module (BLV512 or BLL510), if required, must be ordered separately.
Interchangeable YP programmer modules allow for complete versatility in selection of control func-
tion, timing, and flame scanning means. Functions such as pre-purge time, recycling or non-recy-
cling interlocks, high fire proving interlock, and trial for ignition timing of the pilot and main flame
are determined by the programmer module. The BurnerLogix system can be used with ultra-violet,
auto-check infrared, flame rod, self-check ultra-violet flame scanners or direct coupled integrated
scanners by choosing the proper chassis/flame amplifier module.
YB110/YB230 FIREYE
®
BurnerLogiX
™
MICROPROCESSOR-BASED
INTEGRATED BURNER
MANAGEMENT CONTROL
BL-1001
December 17, 2008
APPROVED
