![background image](http://html.mh-extra.com/html/firegear/lume-ms1/lume-ms1_installation-instruction_2291739001.webp)
DO NOT DISCARD. THIS INSTALLATION INSTRUCTION HAS
IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS. LEAVE WITH THE HOMEOWNER.
MODEL:
SERIAL #:
LUME-MS1
LUME-MS2
LUME-MS1SR
LUME-MS2SR
The LUME Freestanding Fire Pit is a 100% Commercial-Grade Stainless Steel smoke-less
wood-burning fire pit, specially designed to burn more efficiently and emit less smoke. The
LUME comes in two sizes with sear and non-sear options. The LUME can be placed in a variety
of outdoor areas and can also be dropped into a paving system for built-in application. If
installing the freestanding LUME in an SRW/Paver application, do not attach the legs to the unit
(review the Fits Opening dimensions on page 2). Stack wood at the open base of the pit using
the log cabin technique, light it, and then allow a few minutes for the fuels to ignite properly.
Within minutes enjoy the warmth, ambiance, and comfort of the LUME Smoke-Less Fire Pit.
IF YOU CANNOT READ OR UNDERSTAND THESE INSTALLATION INSTRUCTIONS, DO NOT
ATTEMPT TO INSTALL OR OPERATE THIS APPLIANCE.
WARNING: Fuels used in wood-burning appliances, and the products of combustion of such
fuels, can expose you to chemicals including carbon black, which is known to the state of
California to cause birth defects or other reproductive harm. For more information go to
www.p65Warnings.ca.gov
WARNING: FOR OUTDOOR USE ONLY
WARNING: Do not leave unattended during use.
WARNING: Improper installation, adjustment, alteration, service or maintenance can cause
injury or property damage, personal injury, or loss of life. Read the installation instructions
provided with this appliance.
1