![background image](http://html.mh-extra.com/html/finishing-touch/yes/yes_quick-start-manual_2289857001.webp)
Thank you
for your purchase of the
Finishing Touch (FT) Yes!
Please follow
these simple steps to begin eliminating
unwanted hair easily and painlessly!
1.
Fully charge unit prior to first use.
(It takes approximately 2.5 hours for unit to
fully charge)
2.
Make sure skin is clean and dry.
3.
Turn switch to ON position. Purple touch activated
light and green LED will flash.
4.
Position Trimmer Head against the skin to begin hair
removal.
(Touch activated light will automatically turn
on when in use.)
5.
Remove hair by gliding the unit in the opposite
direction of hair growth for best results.
6.
For shorter hair or stubble, change to Microfoil
Head.
7.
Unit will turn off when not in use. Turn switch to
OFF position when finished to save battery.
For complete usage please see full instructions inside
•
WATER WILL DAMAGE THE FT Yes!
Do not use the unit in the shower, near water,
or in a damp room.
•
DO NOT RINSE THE HEAD UNDER WATER!
To clean the head, use the brush that
is included in the package. Make sure the unit is turned off.
• FT Yes should be switched off and stored in a cool dry place when not in use.
• For best performance, it is NOT recommended to use the FT Yes while it is charging.
MICROFOIL HEAD MAINTENANCE
To maintain optimal performance of the Microfoil Head, from time to time clippings
trapped in the head may need to be cleaned out. The Microfoil Head is designed for
easy removal and may be easily cleaned by removing the head from the FT Yes, then
gently
tapping the bottom of the head against a hard surface, such as a sink. The
brush included with the FT Yes may be used to swipe out any remaining clippings.
Compressed air, such as computer duster, may also be used to blow the clippings
from the Microfoil
Head.
The main body of the FT Yes underneath the head should also be brushed or blown
clean any time the head is cleaned or changed.
TRIMMER HEAD MAINTENANCE
The performance of the Trimmer Head may be kept at optimal level with regular
cleaning (as described above) and lubrication of the Trimmer Head. To lubricate the
Trimmer Head, after cleaning, apply a drop or two of mineral oil (or baby oil) to the
front edge.
• Keep out of reach of children.
• Exercise caution when using around eyes.
• The FT Yes contains a Lithium ion battery. DO NOT DISPOSE OF IN FIRE.
Trimmer Head and Microfoil Heads
• Chin
• Underarms
• Knees
• Ankles
• Arms
• Toes
• Bikini
• Calf
• Thigh
Wayne, NJ 07470
Made in China © 2015 Ideavillage
FTYMF11132015
This device complies with part 15 of
the FCC Rules. Operation is subject
to the following two conditions: (1)
this device may not cause harmful
interference, and (2) this device
must accept any interference
received, including interference
that may cause undesired operation.
Notice: Changes or modification not
expressly approved by the party
responsible for compliance could void the
user’s authority to operate the equipment.