01
02
03
04
05
Specifications
Specifications good in ambient conditions of 73°F ±9°F
(23°C ±5°C), <75% relative humidity
Over range:
"OL" is displayed
Maximum load:
252 lbs (114 kg)
Auto power off:
30 minutes of inactivity (no change in weight or
buttons pressed), (APO can be disabled)
Backlight:
Blue, turns off in 60 seconds if no buttons are pressed
Accuracy:
±0.03%rdg + 0.25 oz (10 g), 0 to 66 lbs (0 to 30 kg)
±0.05%rdg + 0.25 oz (10 g), 66 to 252 lbs (30 to 114 kg)
Resolution and Units:
lb oz (0.25 oz), lb (0.1 lb), oz (0.1 oz),
kg g (10 g), kg (0.1 kg), g (10 g)
Temperature coefficient:
0.1 x (specified accuracy) per °F
Wireless Range:
100 feet (30 meters)
Radio Frequency:
2400 MHz
Battery Type:
Remote Display:
9V, NEDA 1604, JIS 006P, IEC 6F22
Platform:
6 x AA, NEDA 15A, JIS UM3, IEC LR6
Battery Life:
is displayed when the battery voltage drops
below the operating level.
Remote Display:
80 hours typical alkaline (without backlight)
Platform:
200 hours typical alkaline
Operating environment:
32°F to 122°F (0°C to 50°C) at <75% RH
Storage temperature:
-4°F to 140°F (-20°C to 60°C), 0 to 80% RH
(with battery removed)
Weight:
7.3 lbs (3.3 kg)
Quick Start
1 Install the 9V battery into the remote display
and 6 x AA batteries into the platform.
2 Press for 1 second to turn on the platform.
3 Press for 1 second to turn on the display.
4 Read weight directly on the display.
Certifications
EN300 220
Remote FCC ID: 2ALHR001
Platform FCC ID: 2ALHR002
RCM
WEEE
RoHS Compliant
Description
Your new SRS3 Wireless Refrigerant Scale
combines modern wireless electronics and
rugged materials to perform at the high level
you demand.
The platform is made of thick aluminum to
maintain accuracy over the life of the product.
Rubber bumpers and pad cushion both the tank
and the scale itself.
A new wireless protocol sends platform
measurements to both the included remote
display and the Fieldpiece Job Link
TM
mobile
app.
Platform electronics are sealed to block
the occasional moisture seen from rain and
splashing.
Hang the remote display from a condenser or
anywhere metallic and easy to see. The magnetic
folding hat holds it right where you put it.
Maintenance
Clean the exterior with a dry cloth. Do not
use liquid.
The batteries of the remote or platform must
be replaced when its battery life indicator
is
empty. Remove rear battery cover and replace.
Buttons
Press for 1 second to power the
platform on/off.
Press for 1 second to power the
remote on/off. Tap for backlight.
Press for 1 second to zero (tare).
Press for 1 second to cycle through
units.
Press for 1 second to search for
available platforms to connect to.
Display Icons
Auto Power Off Enabled on Platform
Remote Display Battery Life
Platform Battery Life
Wireless Signal Strength
Pounds
Kilograms
Ounces
Grams
Fieldpiece
Wireless
Refrigerant
Scale
OPERATOR'S
MANUAL
Model SRS3
