background image

IDENTIFICATION 

 

 

M10910-3de-ID-B 

 

 

 

 

 
=== Ende der  List e f ür T ext mar ke Dec kbl att  === 

 

Anschluss und  Inbetriebnahme 

Installation and starting up 

 

Vielen Dank, dass Sie sich für den Kauf des 
ID ISC.LRU3x00-EU/-FCC entschieden haben. 

Der ID ISC.LRU3x00-EU/-FCC ist ein Gerät zum 
berührungslosen Datenaustausch mit gängigen 
Transpondern nach EPC Class 1 Generation 2 und 
ISO 18000-6-C.  Der Anschluss an einem Computer 
oder sonstiges Gerät erfolgt über die USB 
Schnittstelle oder eine der seriellen Schnittstellen 
(RS232/485) sowie der Ethernet Schnittstelle. 

Thank you for deciding to purchase the 
ID ISC.LRU3x00-EU/-FCC. 

The ID ISC.LRU3x00-EU/-FCC is a device for 
contactless data exchange with common 
Transponder according to EPC Class 1 Generation 
2 and ISO 18000-6-C. The connection to a computer 
or other equipment is carried out via the USB 
interface or one of the serial interfaces (RS232/485) 
as well as the Ethernet interface. 

 

 

 

 

 

 

Weiterführende Informationen, Treiber und 
Software können unter 

www.feig.de

 

heruntergeladen werden. 
Benutzername: LRU_MRU_PRHD 
Passwort: uhf_reader 

Further information, driver  and software can be 
downloaded from 

www.feig.de

. 

 
Username: LRU_MRU_PRHD 
Password: uhf_reader 

Installation 

ID ISC.LR3000 / ID ISC.LRU3500 

Summary of Contents for ID ISC.LRU3000-EU









Reviews: