175
Packing (1)
174
Brass Nozzle
173
Nozzle “Fan Jet”
172
O-Ring 5.0 x 1.5
171
Short Swirl Piece
168
Filtre
167
Suction Tube
166
Bottle O-Ring 36.0 x 4.0
165
Screw Cap
164
Valve Spring
163
Valve Plunger
162
O-Ring 3.0 x 2.7
161
Pump Cylinder
150
Retaining Disk
140
Plastic Ball
130
Clip
120
Pump Handle Guide
110
Plunger
100
Screw
90
O-Ring 5.0 x 1.5
80
Plunger O-Ring 14.0 x 3.5
70
Pressure Spring 3 bar
60
Spring
50
Swirl Cone
40
Trigger
20/30
Pump Handle with Lid
10
Sprayer Cup
Manual
Compressed Air Sprayer
50201 KPV-FPV/FPE Model
Manufactured in Germany
FBS Distribution Co., Inc.
www.fbs-online.com
Instructions for Use – Manual Operation
•
Fill the bottle up to the “Max” indicator.
•
Insert pump assembly into the bottle, and screw-on very
tightly, so the seals can maintain sufficient pressure.
•
Extend pump plunger and stroke 20 – 30 times.
•
For spraying, press the trigger. Slowly turn the nozzle to
adjust spray pattern from fine mist to jet.
•
Always release pressure in the unit before storage.
•
Immediately after use, clean the pump sprayer with clear
water.
•
Occasionally lubricate the pump barrel with a few drops
of light oil.
Warranty
Sprayers carry a limited Warranty, which is limited to replacement of
defective part(s) only. Damage attributable to improper use, faulty
maintenance, the effects of chemicals or normal wear and tear
(Seals/o-rings) is excluded from the Warranty.
If defective, the sprayer(s) should be returned to FBS for examination with
transportation prepaid. If defects are covered by the Warranty, the least
expensive inbound/outbound charges will be borne by FBS/Manufacturer.
All returned and repairable sprayers not covered by the Warranty will be
repaired/reconditioned according to the repair fee/schedule, and charges
borne by the customer.
For more information visit our web site at
www.fbs-online.com
and consult with FBS for chemical compatibility before using
the sprayer.
