Fargo
®
Set-Up and Maintenance Instructions Sheet
Figure 1
1.
Carefully remove from
package.
Figure 2
ELECTRICAL REQUIREMENTS
Table fan requires a grounded electrical supply line of
120 volts AC, 60 Hz, 15 amp circuit. 8 ft power cord
included.
NOT for Damp Location Use.
Set Up:
2.
Plug directly into the
socket.
Figure 3
3.
Select the desired airflow,
located on back of fan base by
rotating switch clockwise
Maintenance — To Clean Your Fan:
Periodic cleaning of your new fan is the only maintenance
that is needed.
When cleaning, use only a soft brush or lint free cloth to
avoid scratching the � nish.
Abrasive cleaning agents are not required and should be
avoided to prevent damage to � nish.
CAUTION
Do not use water when cleaning your fan. It could
damage the motor or the finish and create the possibility
of electrical shock.
▲WARNING
To Avoid Fire Or Electrical Shock, Do NOT Use This Fan
With Any Solid-State Speed Control Device And Do NOT
Use By Open Window.
