evertz 2430RX-J2K-IP Series User Manual Download | Manualshive

Page: 1 / 44

background image

2430RX-J2K-IP Series

JPEG2000 to HDMI Converter

User Manual

© Copyright 2014

EVERTZ MICROSYSTEMS LTD.

5288 John Lucas Drive,
Burlington, Ontario,
Canada L7L 5Z9
Phone:

+1 905-335-3700

Sales:

[email protected]

Fax: +1 905-335-3573

Tech Support: [email protected]

Fax: +1 905-335-7571

Web Page:

http://www.evertz.com

Version 0.1, July 2014

The material contained in this manual consists of information that is the property of Evertz Microsystems and is
intended solely for the use of purchasers of the 2430RX-J2K-IP. Evertz Microsystems expressly prohibits the use of
this manual for any purpose other than the operation of the 2430RX-J2K-IP. Due to on going research and
development, features and specifications in this manual are subject to change without notice.

All rights reserved. No part of this publication may be reproduced without the express written permission of Evertz
Microsystems Ltd. Copies of this manual can be ordered from your Evertz dealer or from Evertz Microsystems.

1
2
3
...
»

Summary of Contents for 2430RX-J2K-IP Series













































Reviews:

No comments

Related manuals for 2430RX-J2K-IP Series

Brand: VBrick Pages: 2

Brand: VBrick Pages: 80

Brand: Danfoss Pages: 68

Brand: Patton electronics Pages: 3

Brand: Velleman Pages: 28

blueplanet 3.0 TL3 M2 WM OD IIG0

Brand: Kaco Pages: 262

Brand: Quanmax Pages: 44

Brand: 3onedata Pages: 3

Brand: Shanling Pages: 8

Brand: Black Iris For Telecom & Technology Pages: 14

Brand: YOKOGAWA Pages: 84

Brand: GoMax Electronics Pages: 12

Brand: Optelecom-nkf Pages: 4

Brand: Sveon Pages: 45

Brand: Extron electronics Pages: 54

Pure Sine PST-100S-12E

Brand: Samlexpower Pages: 48

SF1.6/2.2/3KTL-S

Brand: Moso Pages: 38

Brand: XTBA Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands