Etec E580TM Installation Manual Download | Manualshive

Page: 1 / 12

background image

Tilting LCD/Plasma Flat Panel

Wall Mount

Installation Guide

• Supports most 36” - 63” LCD/Plasma Flat Panels
• Maximum weight capacity: 176 lbs.
• Supports VESA Sizes up to 700X500

This product is intended only to mount a television of the indicated size and weight.
Using this product to mount televisions heavier than the maximum weight capacity can
damage equipment and cause personal injury.

READ THIS FIRST
Read this entire manual! Do not attempt to install this product if you do not understand the
instructions. Contact a qualified mount installer if you have any doubts about a safe and
secure mount installation, or if you are not sure what specific wall materials you are at-
taching this mount to. Check all the parts carefully to make sure there are no missing
or damaged parts. Improper installation may result in damage to your TV, property, and
personal injury.

• Easy installation
• Low profile
• Built-in level for easy positioning
• Safety bolts lock the TV on the mount
• Easy to adjust tilt angles:
-5 to 15 degrees

Model: E580TM

1
2
3
...
»

Summary of Contents for E580TM













Reviews:

No comments

Related manuals for E580TM

Brand: HAGOR Pages: 16

Atlona AT-OME-WP-BKT

Brand: Panduit Pages: 2

Brand: StarTech.com Pages: 27

BriteCor AC BBS

Brand: LITESHEET Pages: 4

Brand: B-Tech Pages: 16

TerraClamp MagicMount Pro Bolt

Brand: Scosche Pages: 4

Brand: UMAGE Pages: 32

Brand: M-system Pages: 2

Brand: CHIEF Pages: 6

Brand: Husky Mounts Pages: 4

Brand: Unicol Pages: 5

Brand: Fluidmaster Pages: 2

Brand: Kolpin Outdoors Pages: 7

Brand: XanLite Pages: 8

Brand: Chauvet Pages: 40

Brand: Atdec Pages: 2

Brand: Barkan Pages: 7

Brand: Body Solid Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands