P/N 83-210047 Rev D
1
Quick Start
MS-9 Laser Scanner
This guide is designed to get your scanner up and running
quickly. When connected to a host computer with Windows™
operating system (2000 or above), you can use
ESP
(Easy
Setup Program) to configure and control your
MS-9 Laser
Scanner
. In addition to
ESP
, you can send commands to your
scanner by serial command and by the scanner’s embedded
menus.
For a full explanation of the MS-9’s commands and features,
refer to the
Help
section of
ESP
or contact your Microscan sales
representative.
