USER INSTRUCTIONS
WELDING HELMET
Warning
Certification and Control labels
We are therefore allowed to use the following marks:
ADF Marking Explaination:
The auto-darkening filters fitted in the
Aristo
®
Tech
helmets only resist a certain amount of heat. Please do not place them near naked flames or hot
work areas etc. Operating temperature of electronic filter minus 10ºC to plus 55ºC. Materials that may get in contact with the wearers skin could cause
Allergic reactions to susceptible individuals
The
Aristo
®
Tech
welding filters are tested for eye protection by the following notified body: DIN Prüf-und Zertifizierungsstelle für Augenschutz,
Westliche 56, D 75172 Pforzheim, notified body 0196, that provides approval and continual quality system under the control of the European
Commission, the German Ministry for Work and the Central Office of the Provinces.
European Conformity mark.
This confirms that the product
fulfils the requirements of the
Directive 89/686/EWG
Address from DIN CERTCO as Notified Body 0196
DIN CERTCO Gesellschaft für
Konformitätsbewertung mbH
Gartenstraße 133
D-73430 Aalen
GERMANY
CE 4/5-13 ESAB 1/1/1/2 EN379
EN 379
4 - light state scale number
5- lightest dark state scale number
13 darkest state scale number
ESAB - Manufactures identification
1 - Optical class
1 - Diffusion of light class
1 - variation in luminous transmittance class
2 – angle dependency class
379 - Number of the standard
ESAB AB operates a policy of continuous improvement. We therefore reserve the right to make changes and improvements to any of our products without notice.
ESAB Group (UK) Ltd
Hanover House
Queensgate,
Britannia Road,
Waltham Cross,
Hertfordshire EN8 7TF
England
www.esab.co.uk
ATECH-01-UI-Ra