G960-2.5 w/2 liter High Pressure Spray Gun
Pistola de alta
Presión
(G9602L2.5)
Includes:
1 G960 Spray Gun w/ 2.5mm Nozzle
1 PT20 2 Liter Pressure Tank
1 AH15 Orange Air Hose 1.5m
1 MH15 Blacke Material Hose 1.5mm
1 PT20-012 Plated Steel Handle w/Nut
1 PT20-005 Tank Lid Seal (EP)
1 Tool Kit, (Stamped Wrench & Hex Key)
Safety Warnings & Precautions:
1. Keep work area clean.
2. Keep children away from this equipment and your work area.
3. Do not operate this equipment under the influence of alcohol or drugs.
4. Do not operate this equipment near open flames or other heat sources.
5. Read all safety information for material to be sprayed.
6. Read all safety information for cleaning materials to be used.
7. Check all seals before connectiing to air supply. Make sure lid is fully attached to the cup,
retaining is screwed past the first thread, air pressure plug is fully tightened and air supply is
sealed and firmly attached.
8. Use eye protection at all times.
9. Wear properly fitting protective clothing at all times.
10. Replace any component that looks warn or damaged immediately.
11. Use only approved ES Manufacturing components.
12. Follow all company saftey policies, and contact your supervisor with any questions.
Air
Connection
G960 Spray Gun
w/2.5mm Nozzle
PT20
MH15
PT20
AH15
Air
Inlet
PT20
012
Assembly
Reference Figure 1
1. Connect black material hose (PT20-MH15) to the
material outlet as shown, using the supplied wrench.
2. Connect the other end of the black hose to the both of
the G960 spray gun head, just below the air cap, using
the supplied wrench.
3. Connect the orange air hose (PT20-AH15) toe the air
connection point on the regulator assembly as shown.
4. Connect the other end of the orange hose to the bottom
of the G960 spray gun, at the bottom of the handle as
shown. Using teflon sealing tape on these connection
will reduce the chance for air leaks.
Material
Outlet
Figure 1
