1
IMPORTANT
If your printer is new, set it up according to
the enclosed manufacturer’s instructions.
This is a check to ensure your new printer
and drivers are working correctly before the
Eco-Flo System is installed.
ECO-FLO CONTINUOUS INK SYSTEM
Per ma
Jet
Assembly Instr uctions for
:
R3 0 0 0
Ink System
It is ver y impor tant you r ead these instr uct ions car efully befor e you begin
.
What you will need to Install the Eco-Flo R3000
What is included in your Eco-Flo R3000 Kit
Complete Eco-Flo R3000 kit
Injectors set with tubes and white clamps
Scissors
Lid deactivation key
Paper towels
Set of 9 empty 100ml bottles
Set of 9 bottle caps & clear piping tubes
Bottle holder tray
1 grey tube clip with adhesive pad
2 lid support pads
Installation instructions and profiles CD
10ml syringe & wing adaptor
Pair of latex gloves
9x Image-life 125ml ink set
PermaJet A4 Media Test Pack
Check Printer Condition
If you have a brand new printer, follow the Epson instructions for setting up your printer. Use the Epson cartridges
that came with the printer. Follow normal installation instructions for the software. Test the printer by printing
pictures. Learn how to use the Epson utilities to run a Nozzle pattern check and to run a Cleaning Cycle.
Epson R3000
Part No. APJ28500
Version 3 – May 2013
EPSON PRINTER
Make sure that the printer can produce a perfect nozzle pattern
before proceeding with Eco-Flo installation.
