MPL and MPL-T LED street luminaire
Mounting instruction
MPL
, MPL-T
parameter table:
Electrical scheme:
IMPORTANT SAFEGUARDS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
1. The luminaire is not allowed to be placed in the water or close to fire resource and high temperature place.
2. Before installing this fixture or doing any maintenance, make sure to turn off the power
supply at the circuit breaker or fuse box.
3.
l
Make sure that the uminaire is not damaged before install and use. If the glass is broken or damaged it must be
replaced.
4. Only the authorized electrician can nstall the l
, and the wire should
with
national standards.
i
uminaire
comply
the
5.
, , 4 or 5
Input cable can be 2 3
cores and the min cross-sectional area of the conductor should be 1.5 mm2.
The input cable should meet
of
requirements
IEC 60227 or IEC 60245.
6. Check to make sure that all the fixture connections have been properly made and the fixture is grounded to avoid
potential electrical shocks.
LED quantity
8 - 32
Power
1
0-1
2
0W
Weight max
5 kg
Product dimensions:
2
Projected area -
0,001
m max. The max mounting height -
16
m
490
90.
Ø 61
25
260
35
102.8
422
220-240V AC
50-60Hz
LED
Driver
module
Controller
optional
MPL
MPL-T
106.8
1
13.5
MPL
MPL-T
100
106.5
MPL
MPL-T
172.5
1 / 5
MPL
MPL-T
1
10
IK 09
Ta
-40°C
+50°C
Pending
Pending
MAINTENANCE OF LUMINAIRE
Maintenance of luminaire must be done accorrding the standard CIE 154-2003.
Recommended period of maintenance - every 3-4 years.
Cleaning must be done with soft material and soapy water.
Do not use agressive chemicals or solvents!
The information in this document is subject to change without notice.
http://www.enimlighting.com
Updated 2021.06.01
