background image

www.Fisher.com

Fisher

 1078 Declutchable Manual Actuator

Contents

Introduction

1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Scope of Manual

1

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Description

2

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Specifications

3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Educational Services

3

. . . . . . . . . . . . . . . . . . . . . . . . .

Installation

5

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Converting An Existing Power Actuator for use 

with the Fisher 1078 Manual Actuator

6

. . . . . . . .

Installing the Manual Actuator

6

. . . . . . . . . . . . . . . . .

Installing the Manual Actuator on a 1061

Size 30, 40, 60, 68, 80, or 100 and
1052 Size 70

7

. . . . . . . . . . . . . . . . . . . . . . . . . .

Installing the Manual Actuator on a 2052 

Size 1, 2, or 3

7

. . . . . . . . . . . . . . . . . . . . . . . . . .

Operation

7

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Engaging and Disengaging the Manual Actuator

8

. .

Engaging the Manual Actuator

8

. . . . . . . . . . . . .

Disengaging the Manual Actuator

8

. . . . . . . . . .

Maintenance

8

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Lubrication

9

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Parts Ordering

10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Parts List

10

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Manual Actuator Assembly

10

. . . . . . . . . . . . . . . . . . .

Field Mounting Parts

10

. . . . . . . . . . . . . . . . . . . . . . . .

For 1061; and 1052 Size 70 Actuators

10

. . . . . .

Figure 1. Fisher 1078 Manual Actuator Mounted on
a 2052 Size 1 Actuator

X0178

Introduction

Scope of Manual

This instruction manual includes installation, operation, and maintenance information for the Fisher 1078
declutchable manual actuator (figure 1). Refer to separate instruction manuals for instructions covering the power
actuator and control valve.

Do not install, operate, or maintain a 1078 declutchable manual actuator without being fully trained and qualified in
valve, actuator, and accessory installation, operation, and maintenance. 

To avoid personal injury or property damage,

it is important to carefully read, understand, and follow all the contents of this manual, including all safety cautions
and warnings.

 If you have any questions about these instructions, contact your 

Emerson sales office

 or Local Business

Partner before proceeding.

Instruction Manual

D101329X012

1078 Actuator

June 2017

Summary of Contents for Fisher 1078













Reviews: