model SUBR10IC
high performance
custom installed subwoofer
EQ 1
EQ 3
POWER MODE
EQ 2
SPEAKER OUTPUT
LINE IN
L
R
LFE IN
CROSSOVER
PHASE
(Sub 1+Sub 2) minimum 4
Ω
Total Impedance
SUB 1
+
-
SUB 2
+
-
DC 12V
IN
OUT
AUTO
ON
SETTINGS
TRIGGER
50
200
0
°
180
°
S/N:
Speaker Terminal Cup
Elura AMP500/1 Rear Panel
Subwoofer
Grille Kit
•
Grille
•
6 - Painted screws
•
1 - Grille Gasket
Accessories
•
5 - Acoustic foam strips
•
1 - MDF Cover / Template
•
1 - Retrofit Locating Template
Mounting Kit
•
16 - Screws
•
4 - L brackets
-
* Note: You can add
up to
(
2
)
SUBR10IC
subwoofers to
(
1
)
Elura
AMP500/1
Sub 1
Sub 2
+
Features.
•
Conveniently hide the subwoofer
into a ceiling or floor joists without
degrading performance.
•
Long throw 10” woofer.
•
Braced and slot-vented rigid MDF
enclosure.
•
Designed to use a
n
HVAC like vent
grille to blend into the environment.
•
Engineered to work with Elura
subwoofer amp, model AMP500/1.
Overview.
Thank you for purchasing Elura speaker
products. Elura is a high performance
custom installed product engineered
for movie and music enthusiasts. Each
Elura product is manufactured to the
highest quality standard using state of
the art components and built for years
of enjoyment.
Considerations.
Before connecting, mounting or
installing any Elura products, please
read all instructions. Careful
considerations should be given to avoid
obstacles such as electrical wires,
plumbing or HVAC products.
If you are unsure or inexperienced with
construction methods, please consult a
professional.
Use the proper tools and pay close
attention to detail while connecting the
speaker wires. Make sure all equipment
is powered off while connecting and
disconnecting any equipment.
Improper use, not following precautions
or instructions may cause damage to
property, equipment, and possible injury
or electrocution.
Contents.
• Elura SUBR10IC
• All hardware needed to attach
the speaker enclosure onto the
ceiling or floor joists.
• Sound deadening foam adhesive
strips
• HVAC like speaker grille &
screws
• Retrofit locating template
• Installation Manual
Connections.
Connect the subwoofer speaker
connections to high-quality 14 to 16
gauge stranded CL3 speaker wire and
connect to the AMP500/1 speaker
output connections. The stripped bare
ends of the speaker wire may be
connected directly to the speaker’s
binding posts. Twist the speaker wire
to avoid strands from shorting from
one connection to the other and pay
careful attention to polarity (+ / - ).
