background image

ERPB2-8C, ERPB2-8RAC, ERPBV2-8C, ERPBV2-8RAC, LRPB2-8C, LRPB2-8RAC

97924C  (Rev. A - 03/03)

Page 1

SWIRLFLO   Refrigerated fountains with FLEXI-GUARD

INSTALLATION, CARE & USE MANUAL

T M

T M

!

CAUTION:

Review these instructions before beginning installation. Be sure that installation
conforms to all plumbing, electrical and other applicable codes.

!

WARNING:

When installation is complete, ensure these instructions are left in the plastic bag
provided inside the installed unit for future reference.

!

WARNING:

Service to be performed by authorized service personnel only.

INSTALLER

NOTE: It is common practice to ground electrical hardware such as telephones, computers and other devices

to available water lines. This can, however, cause electrical feedback in the plumbing circuit, which

results in an “electrolysis” effect occurring in the fountain. This may result in water which has a metallic

taste to it or has a noticeable increase in the metallic content of the water.

When inspecting plumbing circuit, remember the line may be grounded some distance from the

installation, and may occur outside the building or area in which the unit is being installed.

This condition can be avoided (in most cases) by using recommended materials during installation. Any

drain fittings provided by the installer should be made of 

plastic

 which will 

electronically isolate

 the

fountain from the remainder of the building’s plumbing circuits.

      ERPB2-8C                                                     ERPB2-8RAC

Summary of Contents for SWIRFLO ERPB2-8C









Reviews: