Essentia
2
1
TrinityPro
Cutter Mixer
Cleaning external surfaces
Wash the external surfaces with warm, soapy water. Avoid using detergents containing abrasive substances, steel wool, brushes or steel scrapers.
Rinse with a damp cloth and dry carefully. Avoid using chlorine or ammonia-based products. Clean the control panel with a soft cloth dampened
with water and, if necessary with neutral detergent. Do not wash the equipment with direct or high pressure jets of water. With the aim of reducing
the emission of polluting substances into the atmosphere, it is advisable to clean the equipment (externally and, when necessary, internally) with
products that have a biodegradability exceeding 90%.
Electrolux Professional strongly recommends to use Electrolux Professional approved
cleaning agents, rinse and descaling agents to obtain better results and maintain product efficiency over time.
Damages caused by cleaning,
as a consequence of use of not approved cleaning agents, rinse and descaling, will be excluded by the warranty.
The operations described must be performed wearing the needed Personal Protection Equipment. Refer to the User Manual.
05UMY01B__ENG0TRK1CMIX
User maintenance guide
2021-07-02
Suggested for you
For more Accessories & Consumables
please look at our Catalogues or contact
our Electrolux Professional Service Partner.
Performance maintenance programmes
In order to ensure the safety and performance of your equipment,
it is recommended that service is undertaken by Electrolux
Professional authorised engineers every 12 months, in
accordance with the manufacturer indications.
Please contact your local Electrolux Professional Service
Centre for details on the maintenance agreement.
Let us ride with you
Are you looking for the user manual, tutorial videos,
accessory guides or other support materials?
E-Tandem, the Electrolux Professional Digital Service will help
you get immediate access to numerous tools.
Simply scan the QR code
on the machine and start your ride.
daily
daily
Bowl assembly
(wear personal protection!)
After each processing cycle, remove the bowl from the
motor base and separate all its parts. Manually remove
processing residues from each part and avoid damaging
them when scraping. Be extremely careful when handling
the blade. Wash the parts in the dishwasher: at the end of
the cycle, dry the parts and reassemble the bowl.
1
Motor base
Clean the outside of the motor base with a damp
sponge and mild detergent, rinse with a clean sponge
and dry completely.
2
E
-Tandem
