05/21/2009
BI501
ELECTRO-BOILER
TS Series
INSTALLATION & OPERATING INSTRUCTIONS
Model
EB-S-13
EB-S-18
EB-S-23
EB-S-27
APPLICATION:
This Electro-Boiler series is factory equipped with outlet temperature sensing and
a smart controller which automatically stages the various elements to operate at
the field preset outlet temperature.
Primary application is any hydronic water heating system where reduced flow or
radiation can cause overheat conditions (example, zones).
However
, if it is a
mixture of large and small zones, the sudden capacity and flow changes may
cause some internal timing/overtemp conditions. With the mixture of zones the
zone controller ZTS-* option is highly
recommended
(see page 2).
This series is equipped for load management interrupt and can apply to standard
baseboard radiation, dual heat combinations, under floor radiant, wood boiler
supplement, etc.
ACCESSORIES:
Attached BL001 lists various accessory or option items which are not part of
basic Electro-Boiler. Also page 3 has additional information on slab stat. Page 2
gives information on a zone control update module which stages elements based
upon zone capacity.
Note:
This product meets the requirements of the ASME Boiler and Pressure
Vessel Code.
Drawings:
BX501
BX502
BH501
BS501
BL001
XX017
