Electric Druid FilterFX Project, Руководство по монтажу

Страница: 1 / 11

Electric Druid FilterFX Construction Guide www.electricdruid.net
Electric Druid FilterFX Project
Overview
The FilterFX project uses the Druid STOMPLFO to control a 12dB/oct state variable filter. A state
variable filter is chosen because this filter design offers highpass, bandpass, and lowpass outputs
Overview 1
Build Instructions 3
Populate the PCB 3
Power protection diode 3
1N4148 Diode 3
Resistors 3
Cup of tea and soldering check 4
IC sockets 4
Regulator 4
Transistors 4
Ceramic bypass capacitors 4
Film capacitors 4
Electrolytic capacitors 4
Vactrols 5
Second cup of tea and Power Test 5
Drilling the enclosure 5
Potentiometers, Switches, and LEDs 5
Install ICs 6
Off-board wiring 7
Optional Sync Input 7
Optional Expression pedal / CV input 8
Adjustments and final testing 8
Bill of Materials 9
Offboard components 10
Component choices and substitutions 10
Resistors 10
Changing the LED resistors 10
Capacitors 10
Transistors 10
Op-amps 11
Diodes 11
Vactrols/optocouplers 11
Ideas for potential upgrades or customizations 11
Adding CV inputs 11
Adding further expression pedal inputs 11
Page 1