Notice for Use
Thank you for choosing Eleaf products! Please read this manual carefully before
use so as to use correctly. If you require additional information or have questions
about the product or its use, please consult your local agents, or visit our website
at www.eleafworld.com.
For more detailed instructions, please find tutorial video at: www.eleaf-
world.com/video/.
How to Use?
Assembling:
1.Pull up the whole tank section, unscrew the airflow control base from the bottom.
2.Drip a few drops of e-liquid directly into the atomizer head to make the coil inside
fully saturated before first use.
3.Screw the primed atomizer head onto the airflow control base tightly, and then
screw the airflow control base into the tank section.
4.Unplug the top part of the silicone stopper that is located on the bottom of the
tank section to reveal the fill port. (
Note: the bottom part of the silicone stopper is
fixed. Please do not attempt to completely remove the silicone stopper.
)
5.Slowly inject e-liquid into the tank section, and plug the fill port with the silicone
stopper after filling. (
Note: before first use, please let the tank section sit for about
10 minutes after filling to let the coil inside fully saturated with e-liquid.
)
6.Insert the tank section back into the battery, and the device is ready for use.
Power on/off:
Press the button 5 times in quick succession within 1.5 seconds, and the indicator
light will flash 5 times to show the device is powered on. In the same way, it can
also be powered off.
Vaping:
Keep holding the button to take a puff when the device is powered on.
When vaping, the indicator light stays lit. The color of the indicator light changes
according to the remaining battery capacity.
Charging:
the device can be charged by connecting it with 1A wall adapter or
computer via the USB cable. The indicator light is red during charging and goes
out when fully charged.
Properties and Protections:
Atomizer Protection:
every time when vaping time exceeds 15 seconds, the
indicator light flashes 10 times and the output cuts off automatically.
Short Circuit Protection:
if short circuit occurs before vaping, the indicator light
will flash 5 times and the output cuts off automatically when you start to vape; if
short circuit occurs during vaping, the indicator light will flash 3 times.
Low Voltage Protection:
when the voltage of the device is lower than 3.3V, the
indicator light flashes 20 times and there is no output when vaping. Charge the
device to reactivate it.
Resistance Detect:
if the output load resistance is higher than 3.0ohm, the
indicator light will flash slowly to indicate that no atomizer is detected when vaping;
if the output load resistance is lower than 0.4ohm, the indicator light will flash 5
times to indicate a short circuit when vaping.
Warranty
We are not responsible for any damages caused by human error. Legal warranty is
applied.
Warnings
1. Please keep out of reach of children.
2. This product is not recommended for use by young people, non-smokers,
pregnant or breast-feeding women, or persons who are allergic/sensitive to
nicotine.
Contra-indication
1. Do not attempt to repair the product by yourself as damage or personal injury
may occur.
2. Do not leave the product in high temperature or damp conditions, otherwise it
may be damaged.
3. Do not use this product for other purposes except only for vaping and don’t
swallow the e-liquid.
Possible Adverse Effects
1. This product may be hazardous to health and contains nicotine which is
addictive.
2. For people with adverse reaction after using this product, it is recommended to
use the e-liquid with lower nicotine content or no nicotine.
English
Battery Level
100%-60% 59%-20%
≤19%
Color of LED
Green
Blue
Red
User Manual
Fill port
Silicone stopper
Tank section
Atomizer
head
Airflow
control base
Air inlet hole
Battery
Button
Airflow control ring
