© Brooks 2018
P/N B18866
Rev1
230V~ SMOKE & HEAT ALARMS
EIB140RC Series
Instruction Manual
with Alkaline Battery Backup
The EIB140RC series is supplied with an Easi-Fit
base that allows very quick and simple installation
of the Smoke Alarm, combined with simple detector
head removal and replacement. The Easi-Fit base
automatically connects both mains power and battery
as the detector head slides on to the Easi-Fit base.
Up to 12 Smoke/Heat Alarms can be interconnected so
that when one senses fire all the units alarm.
Interconnection can be achieved by hardwire or through
a RadioLINK Base, the EIB168RC.
A green LED indicates the presence of mains power. A
red LED will flash rapidly in an alarm scenario.
All Alarms feature a combined test/hush button.
The “Test/Hush” button will either silence false alarms
or perform a unit self-test.
In “Test” mode the Alarm will perform a self-test and
sound the horn.
In “Hush” mode the Alarm will be silenced for a period
of approximately ten minutes to overcome false alarm
conditions. It will then automatically reset itself.
Introduction to EIB140RC
Smoke/Heat Alarms
User Section
