- WARRANTY INFORMATION -
Please register online at http://www.ehx.com/product-registration or complete and return the enclosed
warranty card within 10 days of purchase. Electro-Harmonix will repair or replace, at its discretion, a product
that fails to operate due to defects in materials or workmanship for a period of one year from date of
purchase. This applies only to original purchasers who have bought their product from an authorized Electro-
Harmonix retailer. Repaired or replaced units will then be warranted for the unexpired portion of the original
warranty term.
If you should need to return your unit for service within the warranty period, please contact the appropriate
office listed below. Customers outside the regions listed below, please contact EHX Customer Service for
information on warranty repairs at [email protected] or +1-718-937-8300. USA and Canadian customers: please
obtain a
Return Authorization Number
(RA#) from EHX Customer Service before returning your product.
Include with your returned unit: a written description of the problem as well as your name, address,
telephone number, e-mail address, and RA#; and a copy of your receipt clearly showing the purchase date.
United States & Canada
EHX CUSTOMER SERVICE
ELECTRO-HARMONIX
c/o NEW SENSOR CORP.
55-01 2ND STREET
LONG ISLAND CITY, NY 11101
Tel: 718-937-8300
Email: [email protected]
Europe
JOHN WILLIAMS
ELECTRO-HARMONIX UK
13 CWMDONKIN TERRACE
SWANSEA SA2 0RQ
UNITED KINGDOM
Tel: +44 179 247 3258
Email: [email protected]
This warranty gives a purchaser specific legal rights. A purchaser may have even greater rights depending
upon the laws of the jurisdiction within which the product was purchased.
To hear demos on all EHX pedals visit us on the web at
www.ehx.com
Email us at
- FCC COMPLIANCE -
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. If the device is not installed and used in
accordance with the instructions, it may cause harmful interference to radio communications and void the
user's authority to guarantee the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help
.
Modifications not expressly approved by the manufacturer could void the user's authority to operate the
equipment under FCC rules.
STEREO POLYPHASE
PHASE SHIFTER
Congratulations on your purchase of the Stereo Polyphase, an envelope
follower and LFO controlled phase shifter. The Stereo Polyphase is a
spectacular phase shifter that uses optocouplers to produce a smooth,
liquidy tone that can elevate your playing out of this world. Unlike most
phase shifters, the Stereo Polyphase FEEDBACK control gives you the
ability to vary the sound of the phase shifter, so that you have the final say
on the character of the phase shifter’s tone.
The Stereo Polyphase allows for optimal user control in three modes of
operation. In ENV mode the Stereo Polyphase is a phase shifter controlled
by an envelope follower. In LFO mode the Stereo Polyphase is a phase
shifter controlled by a low-frequency oscillator. In EXP mode use an
expression pedal (not included) to control the phase shifter. You may also
use an expression pedal in LFO mode or in ENV mode to control the range
of the phase shifter. Hook up the Stereo Polyphase in stereo (each output
to a separate amp/mixer channel) for a broad stereo image.
— POWER —
— CONTROLS —
FEEDBACK Knob
– Controls the amount of signal fedback from the output of the phase
shifter circuit back into the input of the phase shifter circuit. As you turn the feedback control
up, the phase shift effect will sound more pronounced and even sound ‘peaky’ at high settings.
The FEEDBACK knob is always active.
MODE Knob
– When set to ENV the phase shifter is controlled by an envelope follower.
When set to LFO the phase shifter is controlled by a low-frequency oscillator. When set to
EXP the phase shifter is controlled by an expression pedal (not included).
WARNING:
Your unit comes equipped with a 24 Volt/100mA AC external power
adapter.
Use only the power adapter supplied
, and make sure it is appropriate to
your location (USA, Europe, Japan, Australia). Use of the wrong adapter can cause
damage to the unit or to you, and will void the warranty. Connect the included
24VDC/100mA AC Adapter to the Power Jack, located at the top-center of the Stereo
Polyphase.
