297mm
210m
m
Please read all instructions carefully before using
Problems
Solutions
Motor doesn't start or cutting
blade doesn't rotate.
Make sure the power plug is plugged in. At the same
time, please make sure the blending jar is installed
correctly.
Blender emits an odor when
processing
The first few times when used, blender may emit an
odor or smoke. After using a few times, odor will not
appear. Prolonged continuous use can make the
blender emit an odor or smoke. Should this occur,
turn off blender, and let it cool for 60 minutes.
Blending Jar is leaking
Shut down power supply, remove the jar to pour out of
the raw material, then unscrew the blade counter
clockwise. Check whether the seal is correctly
installed in the base.
Can boiling hot liquids be
placed in the blending jar?
No, liquid or ingredients need to be less than 140
degrees Farenheit in order to avoid damage to the
blender.
Can removable parts be
cleaned in the dishwasher?
Do not use a dishwasher to clean the base, cutting
blade and sealing ring. Only blending jar (without
blade), lid, and filler cap are dishwasher safe.
Overloaded blender or
prolonged continuous use
causes the product to
not work.
To prolong the working life of the blender, the motor
has an overheat temperature protection device. When
the motor works for a long time or is overloaded and
reaches a high temperature it
will automatically
power off. After the blender stops working, you must
unplug the cord, and wait for the motor to cool (60
minutes) before using again.
Common problems and solutions
-7-
EdenPURE
®
Whole Food Juicer/Blender
Model: A5745
For service, call 1-800-225-6595 or visit www.edenpuresupport.com
©2017 EdenPURE® I-5428 BR11613R-1
