For Detection and Enumeration of Contaminating Microbes
in Fuels, Lubricants and Water
Instructions for Use
T R U S T E D
I N N O V A T I V E
A C C U R A T E
D E P E N D A B L E
+
+
+
12
Important Notice
Please read the Instructions for Use carefully before testing samples.
The test kit should only be used as part of an investigatory process into contamination in petroleum products and associated water. The
test kit must be used strictly in accordance with these instructions and/or Standard Test Method IP613 or ASTM D7978 or other instructions
authorised by ECHA Microbiology Ltd. The results only relate to the portion of sample tested and not necessarily to other petroleum product
in the system. Although guidance may be sought by the user on sampling and the interpretation of results, the responsibility for carrying out
the sampling and test procedures correctly is that of the end-user and not ECHA Microbiology Ltd. The test kit is designed to detect a
recognized group of micro-organisms of industrial significance, but it is in the nature of microbiology that there may be micro-organisms
present which are not detected by the test procedure. ECHA Microbiology Ltd does not accept any liability for any decision or assessment
taken or made as a consequence of the results obtained.
ECHA Microbiology Ltd, Units 22 & 23 Willowbrook Technology Park, Llandogo Road, St Mellons, Cardiff, UK, CF3 0EF
Tel: + 44 (0) 2920 365930
Fax: +44 (0) 2920 361195
T R U S T E D
I N N O V A T I V E
A C C U R A T E
D E P E N D A B L E
+
+
+
EP066.021216
MICROBMONITOR
2
®
