Do not install and/or operate this safety product unless you have read and understand the
safety information contained in this manual.
1. Proper installation combined with operator training in the use, care, and maintenance of vehicle camera systems
are essential to ensure the safety of you and those you are trying to protect.
2. Exercise caution when working with live electrical connections.
3. This product must be properly grounded. Inadequate grounding and/or shorting of electrical connections can cause high
current arcing, which can cause personal injury and/or severe vehicle damage, including fire.
4. Proper placement and installation are vital to the performance of this device. Install this product so that output
performance of the system is maximized and the controls are placed within convenient reach of the operator so that
s/he can operate the system without losing eye contact with the roadway.
5. It is the responsibility of the vehicle operator to ensure during use that all features of this product work correctly. In use,
the vehicle operator should ensure the projection of the signal is not blocked by vehicle components (i.e., open
trunks or compartment doors), people, vehicles, or other obstructions.
WARNING!
Failure to install or use this product according to manufacturer’s recommendations may result in property
damage, serious bodily/personal injury, and/or death to you and those you are seeking to protect!
!
Page 1 of 6
Introduction:
ECCO’s Reversing Camera System is designed to provide visual cues to help drivers avoid collisions
when backing up. A driver using a properly installed and maintained rear view system can be alerted
to potential safety hazards and thus take the appropriate action to prevent an accident. This manual
provides information about installation, function, safety, maintenance, replacement parts, and warranty.
WARNING!
1. High voltage is present within the monitor. The opening of the case should be by professionals.
2. Do not watch the video while driving unless you are monitoring the rear view camera display.
!
IMPORTANT!
Occasionally, a few highlights or dark spots may occur on the LCD screen. This is a very
common phenomenon in active matrix display technology, and doesn’t necessarily indicate any defects or
faults. Never try to repair this device by yourself. In case of any problems, please turn off the display at once
and notify our company or authorized dealer. The monitor is a complex device. Any disassembly or modification
may lead to damage and void the warranty.
Installation Instructions
Reversing Camera/Monitor System
IMPORTANT!
The pedestal bracket ball joints can be tight when the system is new. These should be checked
before the camera is mounted to the windshield. Both ball joints should be firm but moveable by hand with
moderate effort. If necessary, lubricate each ball joint with silicone spray and work it in before installation. If
the mirror is adjusted and the ball joints are too tight, the windshield could crack.
