DOUBLE 12-INCH SUBWOOFER
See
NOTES TABULAR DATA
for details
CONFIgURatION
Subsystem:
Transducer
Loading
SUB 2x 12 in cone
Vented
Operating Mode:
Amplifier Channels
External Signal Processing
Single-amp LF/LF
DSP w/1-way filter
PERFORMaNCE
Operating Range:
33 Hz to 154 Hz
Nominal Beamwidth:
Horz 360°
Vert 360°
axial Sensitivity
(SPL):
LF1/LF2
(whole space)
96 dB
33 Hz to 154 Hz
(half space)
102 dB
33 Hz to 154 Hz
Input Impedance
(ohms):
Nominal
Minimum
LF1/LF2 4
4.2 @ 143 Hz
High Pass Filter:
High Pass=>35 Hz, 24 dB/octave Butterworth
accelerated Life test:
System
LF1/LF2 63.2 V
1000 W @ 4 ohm
Calculated axial Output Limit:
Average
Peak
LF1/LF2
(whole space)
126 dB
132 dB
(half space)
132 dB
138 dB
ORDERINg Data
Description
Part Number
EAW VFS220i Dual 12-inch Subwoofer Black
2041018-90
EAW VFS220i Dual 12-inch Subwoofer White 2041033-90
Optional Accessories
EAW Eyebolt/Forged Shoulder (M10) 0031810
EAW SBK-MK23_VFS-VFR129 Flybar Black [FB2VSK] 2038319
EAW ACC CASTER KIT 100 [ACC-CK100] 0032377-90
VFS220i
Specifications
Eastern Acoustic Works • One Main Street • Whitinsville, MA 01588 • tel 800 992 5013 / 508 234 6158 • fax 508 234 8251 • www.eaw.com
August 2013
Part Number: RD0752 Rev 100
EAW products are continually improved. All specifications are therefore subject to change without notice.
FEatURES
• High output sub bass system
• Dual 12-in cone transducers
• Optimally vented for increased response
• Extended pole mount cup creates stable base
• Easy lift handles (Black version only)
DESCRIPtION
The VFS “i” revision brings the VF concept more fully into the EAW product
line. VFS “i” Series black versions use handles from the KF and JF Series. An
installation only white version comes without handles or a pole mount cup.
The VFS220i sub bass system includes dual, direct radiating 12-in LF cone
transducers mounted in an optimally vented enclosure. Enclosure venting
uses the enclosure’s resonance to enhance LF response while limiting driver
wear.
The VFS220i black version includes traditional portable features such as a
pole-mount cup, parallel NL4 4-terminal connectors, barrier strip inputs and
handles that accept accessory covers for permanent installation. The white,
installation-only versions omit handles and the pole-mount cup but in-
clude NL4 connector, barrier strip inputs and multiple mounting points. The
new design leaves the enclosure sides completely smooth and attractive.
Optional rigging hardware is available for preconfigured arrays of VFR and
VFS systems.
Six year warranty.
