![background image](http://html.mh-extra.com/html/earthquaker-devices/bellows/bellows_operation-manual_521345001.webp)
O P E R A T I O N M A N U A L
©2018 EarthQuaker Devices LLC
<<< Power Requirements >>>
<<< Tech Specs >>>
• Current Draw: 13mA
• This device can be powered by a 9v battery or a standard 9-volt DC power supply with a 2.1mm
negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart
power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is
ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific
power supplies do not filter dirty power as well and let through unwanted noise.
DO NOT RUN
AT HIGHER VOLTAGES!
• Input Impedance: 250K Ohm
• Output Impedance: <1K Ohm
<<< Warranty >>>
This device has a limited lifetime warranty. If it breaks, we will fix it. Should you encounter any
issues, please email
.
www.earthquakerdevices.com
<<< Switching >>>
This device is true bypass and uses electronic relay-based switching. Audio will not pass
without power.