![background image](http://html.mh-extra.com/html/earshots/wireless-earphones/wireless-earphones_instructions_520823001.webp)
Let’s play... earSHOTS Instructions & Fit Guide
UNBOXING The kit list is:
earSHOTS self-charging case
Left & right earshot
Micro-USB charging cord
Self-charging case
GET STARTED
1.
Take earSHOTS out of self-charging case
2.
SIMULTANOUSLY press and hold the button on the back of BOTH earSHOTS for 3s.
When the lights turn on you can release the buttons
3.
Wait for one of the earSHOTS to flash red/blue (this can take up to 30sec)
4.
Open Settings on your device and select Bluetooth
5.
Wait for earSHOTS to appear in list of devices
6.
Select earSHOTS
Note: See Trouble shooting section if two earSHOTS appear in the list of devices.
Turning on earSHOTS
1.
SIMULTANEOUSLY press and hold the button on the back of BOTH earSHOTS for 3s.
When the lights turn on you can release buttons
Note: When the L earSHOT is flashing red/blue it means earSHOTS are ready to connect to
a device.
Turning off earSHOTS
1.
SIMULTANEOUSLY press and hold the button on the back of BOTH earSHOTS for 5s
2.
earSHOTS lights will pulse red, then turn off
Tip: Placing earSHOTS in the self-charging case will also turn them off
Fitting earSHOTS
1.
Hold the earSHOTS by the arm, close to the earbud
2.
Seperate the earbud from the hook
3.
Tuck the earbud into the ear over the ear canal
4.
Lift the hook over the top of your ear and slide down behind
5.
Line up the end of the earbud with the protruding line on the hook part of the
earSHOT
Note: Tuck the hook tight in behind your ear, where it meets the side of your head
Earbud Positioning
1.
First tuck the red earbud in over the ear canal
2.
The push the earbud into the ear