8/8/2005
Page 1 of 7
© 2005 GLOBAL VR, INC. All Rights Reserved. Electronic Arts, EA, and EA SPORTS are trademarks or registered trademarks of Electronic Arts Inc. in the U.S. and/or other
countries. All rights reserved. PGA TOUR is a trademark of PGA TOUR, INC. and used by permission. Global VR is a registered trademark of Global VR, Inc. All other
trademarks are the properties of their respective owners.
Installing the Externally Mounted Players' Card Dispenser on
EA SPORTS™ PGA TOUR
®
Golf Challenge Edition Upgrade Cabinets
Document Part #: 040-0074-01
This document describes how to install the externally mounted Players' Card dispenser.
GLOBAL VR
®
also offers an internally mounted dispenser (part # 90538-00), which is installed by
cutting an opening in the front of the cabinet.
Kit Contents for Part # 90541-00
Part #
Description
Part #
Description
NA Players'
Card
Dispenser
Assembly with Vault
4600-0012
Wood Screws (3)
115-0003-01
DB25 Ribbon Cable
100-0021-01
Cable Ties (2)
4600-0062
DB Mounting Posts (2)
PLC1.5IS8-C Screw-Mounted
Cable
Tie
USBIO
Nytric Version 1.5 USBI/O Card
(
or
USBI/O Extreme Card)
NA
1/4-20 x 1-1/4” Bolts with Nuts and
Washers (4)
115-0074-01
Players' Card Dispenser Harness
52-6212-00
Button Plugs (2)
44-1100-01
+5/+12 VDC Power Supply*
040-0074-01
Installation Instructions (This Document)
115-0008-01
AC Power Harness*
3100-0001
Players' Cards (25)
115-0079-01
DC Power Harness*
Pre-paid UPS Mailing Label for Returning
the USBI/O Card to GLOBAL VR
®
(for
Domestic Use Only)
*Power supply and associated harnesses are not required for Canadian cabinets.
Tools Required
•
Nutdriver or Wrench
•
Phillips Screwdriver
•
Drill
•
1/4" and 3/4" Drill Bits
•
Pencil
