D
C
B A
F
G
E
H
NOTICE
The following features are standard on your Dynamite
®
Prophet™ 25W AC
Battery Charger:
• Li-Ion/Li-Po/Li-Fe battery cell count of 2 to 3 series cells
• Adjustable charge current settings of 0.5A, 1.0A and 2.0A
• Short-circuit, over-current and reverse polarity protection
• Built in balance circuit
• Meets IP33CW, IK07 environmental specs
Specifi cations
The following specifi cations are standard on your Dynamite Prophet AC
Battery Charger:
• Maximum charge power of 25W
• LED charge indicators for each charge current; 0.5A, 1.0A and 2.0A
• Operating temperature: 0°C to +50°C
The following terms are used throughout the product literature to indicate vari-
ous levels of potential harm when operating this product:
NOTICE:
Procedures, which if not properly followed, create a possibility of physi-
cal property damage AND a little or no possibility of injury.
CAUTION:
Procedures, which if not properly followed, create the probability of
physical property damage AND a possibility of serious injury.
WARNING:
Procedures, which if not properly followed, create the probability of
property damage, collateral damage, and serious injury OR create a high prob-
ability of superfi cial injury.
Meaning of Special Language
Look at the charger to see:
A.
Cell Selection Switch (3S or 2S)
B.
Li-Fe LED color (green)
C.
Li-Po LED color (red)
D.
AC power plug
E.
2S battery pack connection
F.
3S battery pack connection
G.
Charge Rate LED indicators
(2A, 1A and 0.5A)
H.
Start/Stop button
