Integrated High Speed Dome Camera Quick Guide
Integrated High Speed Dome Camera Quick Guide
00-5H8110ZSEA3 00-5H8110ZSEA3
This quick operation guide is a reference for users to operate dome cameras quickly, and therefore only provides
basic information on control keyboard and dome function. Before attempting to connect, configure and operate
the integrated high speed dome, please read the installation guide and control keyboard user’s manual
completely.
System Configuration
Dome Switch Definition
SW.
Definition
Remarks
A
Reserved
B
RS-485 Setting
Refer to User’s Manual
C
Dome ID Setting
Refer to User’s Manual
D
Dome Control Protocol
Refer to User’s Manual
E
RJ-45 Connector
For Ethernet IP function Only
F
22-Pin Connector
Connect the equipped cable
G
ISP Connector
For FW upgrade
D7313 Control Keyboard
The control keyboard function keys and connectors are illustrated and described as below. For more information
on keyboard installation and operation, please refer to the System Control Keyboard user’s manual.
Front Panel
1
Multiplexer/DVR Selection Key
2
Matrix Selection Key (Reserved)
3
Camera/Dome Selection Key
4
CCTV System Setup Key
5
Camera Setup Key
6
ESC Key
7
Direction Keys and Function Keys
8
Camera OSD Key and Enter Key
9
LCD Panel
10
Auto-Pan Function Key
11
Cruise Function Key
12
Keyboard Lock Up Key
13
Auto-Focus Function Key
14
Joystick
15
Multiplexer, DVR or Matrix Control
Keys
16
Number Keys
17
Home Function Key
18
Enter Key
20
Zoom Wide/Tele Keys
21
Focus Near/Far Keys
19
F1: Remote Reset Function
F2: Lock/Unlock Device
F3: Reserved
F4: Dome Speed Test
22
Brightness Up/Down Keys
Rear Panel
1
RS-232 D-SUB
2
Termination Switch
3
Mode Switch
4
Line Selection Switch
5
RJ-11 Jack
6
Terminal Blocks
7
Power Jack
