Caption Maker
Instructions
www.dymo.com
Extend Label 1.2”
Great for captions,
titles and borders!
Check out the
DYMO website for ideas
and inspiration at
www.dymo.com
Produced by:
DYMO, Stamford, CT 06902
©Sanford, L.P.
www.sanfordbrands.com
c u s t o m
i z e
captio n
c r e a t e
Load your 3/8” 3D Label Refi ll
1.2”
Open label cassette
compartment
Feed label into guide
Place cassette into
position
Close back cover
Squeeze the trigger 6 to
8 times to advance tape
1.2
1.1
1.3
1.4
1.5
1.6
Choose your letter or
symbol and place the
pointer in the center of
that character
Squeeze trigger until the
dark pink dot appears in
the lens window
Remove wheel by
pushing the wheel out
from the right side
Register your product
online at
www.dymo.com/register
to learn more about your
product and receive
information on new
products and limited
label edition!
3.1
3.2
3.3
3.4
2.1
2.2
Using your Caption Maker
Insert your wheel
Insert wheel by pushing
wheel in from the left
side
Select scissor and
squeeze trigger to cut
Use cut tab to remove
backing
DO NOT
turn
character wheel
and squeeze at the
same time!
This will cause
damage to
the machine
