Inner Fender
Install Instructions
Est. install time - Approx. less than 1 hour — Difficulty level: EASY
Patent Pending
HARDWARE KIT:
A- Front liner arms w/ (long) screws x 2ea.
B– Front liner screws (medium length) x 4
C– Light Controller Receiver Module
Tools Needed:
1 - 7/64th Allen Key for screws
2– 3/8” wrench or socket & ratchet
3-drill with 7/32nds drill bit (rears only)
4-Punch or scribe to mark for drilling (rears only)
*Special Note: You will need to save and re-use the 8 factory 10mm bolts that held the factory liners in the front.
