background image

• All Weather Durable PVC
• Won’t Dent, Rust, Rot or Mildew
• Tall Walk In Shed
• Never Needs Painting
• 61 Inch Wide Double Doors
• Easy Assembly
• High Wind Tested
• Snow Load Tested 20lbs/sq. foot
• Pad Lock Ready (Lock not included)
• Wooden or Cement Foundation Needed

Call us for any missing or damaged parts.

Do not return to the store.

Your Total Solution To Maintenance Free Storage Sheds.

Available Kits

• Foundation Kit Available
• Modular 2.5 Ft Extension Kits Available
• 10 Ft x 8 Ft Window Kits Available

Ver: 4.0

Building Dimensions  :

Approximate 

Size

Storage 

Exterior Dimension

Interior Dimension 

10 Ft x 8 Ft

79 Sq. Ft 

480 Cu.Ft

Roof Edge to Edge

Base Dimension

Door Opening

3.2 m x 2.4 m

7.3 Sq.m 

13.6 Cu.m

Width 

Depth 

Height 

inch

 cm

125 3/8

318.4

inch

 cm

94 1/4

239.3

125 1/2

318.7

95 1/8

241.6

85 1/2

217.1

inch

 cm

123 3/8

313.3

inch

 cm

92 1/4

234.3

60 5/8

154

71 1/2

181.6

73

185.5

Wall to Wall

Area

Volume

OWNER’S MANUAL / 

Instructions for Assembly ‘

10 Ft WoodBridge’

Size 10 Ft x 8 Ft  / 3.2 m x 2.4 m

 

(Approx.)

Vinyl Garden Shed

Vinyl Garden Shed

A Product of 

TM

A L L   P U R P O S E   V I N Y L   G A R D E N   S H E D S

Customer

Service Hotline

(800) 483-4674

www.duramaxbp.com

 Patent #416.091

Summary of Contents for 10 Ft WoodBridge










































Reviews: