DQ75
I
NSTALLATION GUIDE
O
CT
2016
V
.1
DQ75 Quick start Guide
General Description
The DQ75 is a compact tracking device with built-in GPS & GSM antennas. It has a waterproof (IP67) case which
houses an 1100 mAh Li-polymer back-up battery. Standby time without reporting is 280 hours, with 175 hours
at 10-minute tracking intervals. Its main application is tracking vehicles, trailers, boats & other assets using the
online software. For anti-theft applications, the unit can be mounted on any flat surface facing the sky. Internal
placement is possible inside cabins, equipment consoles and boat lockers, providing the internal GPS antennas
are not blocked by large metallic surfaces. In each case it is best to test the unit in place fixed temporarily with
Velcro or similar on a short journey before connecting the power cable. More permanent fixing of the housing
can be made using the screw fixing lug, ‘VHB’ adhesive tape or cable ties. Ensure that the power cables are
routed away from moving parts, and the serial number label is on the base, with the blank cover facing the sky.
Cable Connections
DQ75 is supplied with an 8-Pin Molex connector which is used for configuration, plus an extension lead with
bare ends. The Molex can be cut off to connect the wires directly, or plugged to the cable extension. Use
waterproof tape or shrink-wrap sleeves if installing in a wet environment, such as boats or Jetskis.
Connect an 8-32 VDC external power source with Red (+) positive and Black (-) ground connections. This will
switch on the device & charge the internal battery.
