background image

FEATURES

•  QUAD element low noise sensor

•  Dual channel processing

•  Four interchangeable lenses

•  LED on / off jumper

•  High level static protection

•  Vertical adjustment

•  High level transient protection

•  SMD construction

•  High level white light immunity

•  Super quiet operation

•  Excellent RF immunity

•  Wall / corner mounting

•  Temperature compensation

•  Small size

•  Energy analysis circuit

•  Blends with any decor

INTRODUCTION

The Bravo4 is a general purpose quad PIR designed to provide
reliable motion detection for large residential and commercial
applications.

Exceptional design care and factory testing ensure years of trouble
free performance.  Immunity against false alarms from RF, static,
electrical transient and white light are all designed in features.

Energy analysis, dual channel signal processing, temperature
compensation and large multi-beam lens design means the human
target will not slip by unnoticed even on a hot summer day.

Four interchangeable lenses, wall or corner mounting and vertical
adjustment provide application versatility, and your client will
appreciate the small size and elegant simplicity of the case design.

SPECIFICATIONS

Operating voltage .................................... 9.5V

DC

-14.5V

DC

Supply voltage ripple ............................. 3.0V pp @ 12V

DC

Standby current ......................................................... 18mA

Current in alarm ......................................................... 16mA

Contact rating (alarm & tamper) ............. 100mA @ 24V

DC

Alarm contact resistor in common .................. 10 ohm ¼W

Operating temperature .................................... 0°C to 49°C

(32°F to 120°F)

Storage temperature .................................... -40°C to 60°C

(-40°F to 140°F)

Operating humidity ........... 5% to 95% RH non-condensing

Storage humidity ............... up to 99% RH non condensing

RF immunity .............. 20 V/m over range 0.01MHz-1.2GHz

Static immunity ............................................................ 25kV

Transient immunity ................................ 2.4kV @ 1.2 joules

White light immunity ................. 20,000 Lux at the detector

Walk detection speed ............. 0.5' to 10'/s (0.15m - 3m/s)

Coverage angle (wall-to-wall lens) ................ 90° minimum

Vertical adjustment ........................ +5° to -10° (see charts)

Mounting heights ............................. 6' to 10' (nominal 7.5')

2m to 3m (nominal  2.3m)

4' to 5' (pet alley only)

1.2m to  1.5m (pet alley only)

NOTE: White light and RF Immunity not verified by UL.

COVERAGE

Wall to Wall lens (BV-L1) 50' L × 60' W (16m × 18m)

Corridor lens (BV-L2)

 60' L × 5' W (18m × 1.5m)

Curtain lens (BV-L3)

 50' L × 4.4' W (16m × 1.3m)

Pet Alley lens (BV-L4)

 50' L × 60' W (16m ×18m)

DIMENSIONS

3.5"H × 2.5"W × 1.87"D (89mmH × 64mmW × 48mmD)

COLOUR

White case with light gray lens

SHIPPING WEIGHT

6 oz. (190 g)

MODELS

BV-400UL

Form A alarm contact

BV-401UL

Form A alarm contact & tamper switch

BV-402UL

Form C alarm contact & tamper switch

WALL-TO-WALL LENS

TOP VIEW

CORRIDOR LENS

TOP VIEW

CURTAIN LENS

SIDE VIEW

TOP VIEW

L2

L3

L4

0 ft

0 m

15 ft

4.6 m

15 ft

4.6 m

30 ft

9.1 m

30 ft

9.1 m

50 ft

15.2 m

50 ft

15.2 m

SIDE VIEW

SIDE VIEW

60 ft

18.3 m

60 ft

18.3 m

6 ft

1.8 m

BEAM PATTERN CHART

ILLUSTRATES THE CENTRE

LINE OF EACH BEAM PAIR

CENTRE

LINE

50 ft

15.2 m

50 ft

15.2 m

Quad Motion Detector

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS

Series

MOUNTING

To open the case, use a small flat blade screwdriver and gently
push in the tab at the bottom of the case and pull the cover
straight out at the bottom.  Loosen the PCB screw, and push the
board up as far as it will go.  Using a small screwdriver, remove
the appropriate knockouts for the mounting screws.  Remove
the left and/or right wiring entrance knockouts located at the top
of the backplate.  Mount the backplate using the appropriate
mounting screws (not supplied).

MOUNTING HEIGHT CHART

HEIGHT

ft / m

SETTING FOR FULL RANGE

WALL/WALL CORRIDOR

CURTAIN

PET ALLEY

10’ / 3 m

8’ / 2.4 m

7’ / 2.1 m

6’ / 1.8 m

5’ / 1.5 m

4’ / 1.2 m

0.00

+0.50

+0.75

+1.00

-0.25

+0.25

+0.25

+0.50

0.00

0.00

0.00

0.00

0.00

0.00

Reviews: