background image

07-01810A 2012-10 Warranty 07-00424 

Dri-Eaz Products, Inc. 

Owner’s Manual 

Dragon Mobile Furnace 

Model F507 

DRI-EAZ PRODUCTS, INC.  

15180 Josh Wilson Road, Burlington, WA 98233 

Phone: 800-932-3030  Fax: 360-757-7950 

www.Dri-Eaz.com

  

 

The Dragon Mobile Furnace is an indirect fired furnace providing heated air for water damage restoration, 

structural drying, construction, event shelters and other temporary heating applications. 

R E A D   A N D   S A V E   T H E S E   I N S T R U C T I O N S

 

Safety Information 

Read this document carefully to learn how to properly 
operate and service your Dragon Mobile Furnace. This 
manual should be kept with the unit and remain with the 
Dragon for the life of the product.  
 
 
 
 
 
 
 

 
 
 
 

WARNING! Do not alter or modify your Dragon in 
any way. Use only replacement parts authorized by 
Dri-Eaz Products, Inc. Modifications or use of 
unapproved parts could create a hazard and will 
void your warranty. Contact your authorized Dri-Eaz 
distributor for assistance. 
 
WARNING! Failure to comply with the instructions 
and precautions provided in this Owner’s Manual 
can result in death, serious bodily injury, and/or 
property loss or damage from hazards of fire, 
explosion, burn, asphyxiation, carbon monoxide 
poisoning, and/or electrical shock.

 

WARNING! Check the Dragon for proper air-to-fuel 
ratio at each location. Failure to adjust for altitude 
changes could cause injury, permanent damage to 
the unit and secondary damage when ducting into a 
structure. It may also void the Dri-Eaz warranty. 
Refer to “Adjusting for Altitude,” p. 5, for 
instructions.  

WARNING! Breathing Hazard. Fuel exhaust contains 
deadly carbon monoxide gas. Operate the Dragon 
only outdoors in open area. NEVER operate indoors 
or in enclosed spaces. 

  Do not stand closer than 8 ft. (2 m) from the outlet of 

the heater. Do not lean or sit on the heater. 

  Keep children and pets away. 

  Make sure there is sufficient air circulation around 

the unit during operation.  

  Only do repair and maintenance after the heater has 

cooled sufficiently and the heater is disconnected 
from the electric power.  

WARNING! Fire and Explosion Hazard 

  Burner produces sparks and flame and unit 

becomes hot during use. Hot surfaces can ignite fuel 
vapors. 

  Keep away from flammable vapors, such as those 

from gasoline, paint thinner or solvents.  

  Keep all flammable material away from the heater, 

including combustible dusts, such as coal dust or 
sawdust.  

  Keep unit at least 8 ft. (2 m) away from any com-

bustible material.  

  Diesel fuel is flammable and can be explosive. 

  Do not smoke while operating, servicing, or refueling 

the Dragon. 

 Before refueling, turn the unit off, allow it to cool, and 

then unplug.  

WARNING! Electric Shock Hazard 

  Unit must be grounded. Use only with 3-hole 

grounded outlet.  

  Never modify plug or use an adaptor. If an extension 

cord is needed, it must have a three-prong 
grounding plug and be rated for outdoor use. 

  Never operate the Dragon in pooled or standing 

water. If electrical components become wet, allow 
them to dry before using. 

 

 

WARNING

 

Summary of Contents for F507

















Reviews: