manualshive.com logo in svg

Dreamline MIRAGE-X SHDR-1948723L Series, Installation Instructions Manual

The Dreamline MIRAGE-X SHDR-1948723L Series is a sleek and modern shower door designed for easy installation. Enhance your bathroom's aesthetics with this high-quality product. For hassle-free setup, simply access the detailed Installation Instructions Manual available for free download at manualshive.com. Transform your shower experience today!

Share
Download
background image

MODEL #s

SHDR-1948723L-##

SHDR-1960723L-##

SHDR-1948723R-##

SHDR-1960723R-##

SHDR-1960580L-##

SHDR-1960580R-##

##=finish

01- Chrome

04- Brushed Nickel

MIRAGE-X

Shower Door Installation Instructions

IMPORTANT

DreamLine

® 

reserves the right to alter, modify or redesign products at any time without prior notice. For the 

latest up-to-date technical drawings, manuals or any other details please refer to your model’s web page on 

DreamLine.com

Please read these instructions carefully before installing. If you have any questions regarding installation, please contact 

our technical support specialists Monday through Friday 8:00 AM – 7:00 PM EST at Phone: 1-866-731-2244, 

Fax: 1-866-857-3638 or e-mail our technical support group at [email protected]

For more information about DreamLine

®

 Shower Doors & Tub Doors please visit DreamLine.com

Left hand panel installation shown

Summary of Contents for MIRAGE-X SHDR-1948723L Series























Reviews:

No comments

Related manuals for MIRAGE-X SHDR-1948723L Series

THE SHOWER LAB VIEW 09 Manual preview
VIEW 09
Brand: THE SHOWER LAB Pages: 28

Brands by name

Popular brands

Load more brands