METAL,
VOLTAGE &
STUD DETECTOR
13818 – 501G
INSTRUCTIONS FOR USE
EN
Original Instructions
Version 1
1. Preface
These are the original product instructions. This document is part of
the product; retain it for the life of the product, passing it on to
subsequent holders. Read this manual in full before attempting to
assemble, operate, or maintain this product.
This Draper Tools manual describes the purpose of the product and
contains all the necessary information to ensure its correct and safe
use. Following all the instructions and guidance in this manual will
ensure the safety of both the product and the operator and increase
the lifespan of the product.
All photographs and drawings within this manual are supplied by
Draper Tools to help illustrate correct operation of the product.
Every effort has been made to ensure the information contained in
this manual is accurate. However, Draper Tools reserves the right to
amend this document without prior warning. Always use the latest
version of the product manual.
1.2 Revisions
Version 1: February 2018
First release
Version 2: June 2022
General content and formatting updates
As our manuals are continually updated, always ensure that the
latest version is used.
Download the latest version from:
drapertools.com/manuals
1.3 Copyright © Notice
Copyright © Draper Tools Limited.
Permission is granted to reproduce this manual for personal and
educational use
ONLY. Commercial copying, redistribution, hiring,
or lending is strictly prohibited.
No part of this manual may be stored in a retrieval system or
transmitted in any other form or means without written permission
from Draper Tools Limited.
In all cases, this copyright notice must remain intact.
1.4 Understanding the Safety Content
WARNING! – Situations or actions that may result in personal injury
or death.
CAUTION! – Situations or actions that may result in damage to the
product or surroundings.
Important: – Information or instructions of particular importance.
2. Warranty
Draper Tools products are carefully tested and inspected before
shipment and are guaranteed to be free from defective materials
and workmanship.
Should the tool develop a fault, return the complete tool to your
nearest distributor or contact Draper Tools directly. Contact
information can be found at the back of this manual.
Proof of purchase must be provided.
If, upon inspection, it is found that the fault occurring is due to
defective materials or workmanship, repairs will be carried out free
of charge. This warranty period covers parts and labour for 12
months from the date of purchase. Where tools have been hired out,
the warranty period covers 90 days from the date of purchase.
This warranty does not apply to any consumable parts, batteries or
normal wear and tear, nor does it cover any damage caused by
misuse, careless or unsafe handling, alterations, accidents, or
repairs attempted or made by any personnel other than the
authorised Draper Tools repair agent.
In all cases, to make a claim for faulty workmanship or materials
within the standard warranty period, please contact or return the
product to the place of purchase. Proof of purchase may be
required.
If the place of purchase is no longer trading or if you experience any
difficulties with your warranty, please contact Customer Services
with the product details and your proof of purchase. Contact details
can be found at the back of this manual.
Helpline: +44 (0) 23 8049 4344 Sales Desk: +44 (0) 23 8049 4333 General Enquiries: +44 (0) 23 8026 6355 Website: drapertools.com Email: [email protected]
Draper Tools Limited, Hursley Road, Chandler’s Ford, Eastleigh, Hampshire, SO53 1YF, UK
0522
