background image

FAR INFRA-RED

DIESEL HEATER

06732, 06733 & 07108

These instructions accompanying the product are the original instructions. This document is part of the product, keep it 

for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before 

assembling, operating or maintaining this product.

This manual has been compiled by Draper Tools describing the purpose for which the product has been designed, and 

contains all the necessary information to ensure its correct and safe use. By following all the general safety instructions 

contained in this manual, it will ensure both product and operator safety, together with longer life of the product itself.

AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.

Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools 

policy of continuous improvement determines the right to make modifications without prior warning.

Please note that model number 06732 is illustrated throughout this instruction booklet.

Summary of Contents for 010418070





















Reviews: