OVERVIEW
D
C
Outside of door
A
*
B
*NOTE:
The throw
member (B)
will be reused.
E
F
G
Switch™ Core Installation Instructions
Insert the control key (D), and rotate 15° clockwise to
disengage the control lug.
With the control key (D) rotated 15°, remove the core (C) and
the throw member (B). If the throw member (B) or the throw
pins do not come out with the core (C), leave them in the lock.
NOTE:
Keep the
throw member (B)
to reuse.
D
D
C
B
D
15°
15°
DISENGAGE CONTROL LUG
1
2
D
REMOVE CORE AND
THROW MEMBER
I
not included
H
included
BEFORE YOU BEGIN:
It is critical to ensure that
Switch™ Core
is compatible with your
Lock Hardware
. Please carefully review page 4 and page 5 of this
document
[Switch™ Core Compatibility Guide]
to ensure that you are installing
Switch™ Core
into appropriate
Lock Hardware
.
A
Lever Handle
B
Throw Member
*
C
Core 7-Pin
D
Control Key
E
Switch™ Core
F
Battery
Hex Key 1/16"
G
Battery Cap
H
I
Battery
Removal Tool
Compatible
Devices:
Android™ 5+
iOS: 11.0+
Switch™ Core
Installation Instructions
T91407_A
©2020 All rights reserved.
1/20
BEST is a trademark of dormakaba USA Inc.
