background image

IP CAMERA

Quick Installation Guide

NDR154P

   (IR Outdoor Motorized Vandal Dome Camera)

Series V1.0

PRECAUTIONS

1. OPEN-CASE INSPECTION

2. PRODUCT STRUCTURE

3. EQUIPMENT INSTALLATION 

l

 Do not use the camera in extreme temperature 

conditions.

Please use the camera within -20

o

C to 50

o

C

Air vent is required at high temperature

l

 Do not use or store the camera in humid environment

It may cause poor image quality.

l

 Do not use the camera in unstable lighting conditions.

Inconsistent lighting or flickering may cause poor image.

l

 Never use the camera close to gas or oil leak.

It may not operate properly.

l

 Do not disassemble the camera.

There is no user serviceable part inside.

l

 Do not drop the camera or apply force on it.

It may cause a malfunction.

1.1

 Check step

When a user receives an IP camera, Please check the equipment 

appearance without obvious damage. Product packaging use 

protective material to deal with most accidental impact in the 

transport process. 

Please open the product outer packing,Check attachment provided 

product is complete,See List 1 below accessories package for 

inspection.

1.2

 Standard accessories

Please make sure the item is consistent with the listing when 

open the product outer packing,Detailed list please see the table 

below,Actual configuration, please refer to specific products.

2.1

 Cable function

2.2

 Dimensions

REMARK: 

External power supply cannot be used with POE 

simultaneously, or it will damage the camera.

When this camera is installed near wireless communication devices that 
emit strong electromagnetic field, irregularity such as noise may appear in 
the image.

List 1 Accessories list 

Picture 1 Cable function

Picture 3 Equipment installation diagram (1)

List 2 Cable function of table

Picture 2 Dimensions

Name

Quantity

IP camera

1

Quick installation guide

1

Accessory pack

1

NO.

Name

Functional description

2

LAN(RJ45)

Connect to a router or switch on your 
network  using  RJ45  Ethernet  cable 
(Cat5e or better). 100Mhz connection. 
PoE  supported  (class  3  PoE  switch 
required).

l

 Never face the camera to strong light for long periods 

of time.

It may damage the CMOS sensor.

Description

: The bracket on the metope must be withstand at least 3X 

the total weight of bracket and camera.

3.1 

Use the Flat Head Screws 4Pcs fixed Wall mount 
bracket & Bracket

3.2

 Put installation sticker on the surface (Wall or Ceiling) 

where need to be installed.

3.3

 Take out screws of bracket and put into expansion bolts 

to fix bracket on the surface (Wall or Ceiling). 

3.4

 Remove base of camera and camera. Screw to fix the 

base on the bracket.  

3.5

 Put camera back to fix with base on the bracket. 

NO.

Name

1

Mounting Screws

2

Wall mount bracket(ACB-02) W1 kit

3

Expansion Bolts

4

Mounting Screws

5

Wall or Ceiling place

6

Installation Sticker

Reviews: